[PATCH] make mousedev resolution module parameter

From: Erik Mouw (J.A.K.Mouw@ITS.TUDelft.NL)
Date: Sun Oct 15 2000 - 10:09:37 EST

(Second try, this time with the correct mailing list address. Duh.)


This patch makes the X and Y resolution in drivers/input/mousedev.c a
module parameter. In this way the screen resolution can be set by

   modprobe mousedev xres=1280 yres=1024

The configure-time resolution is used as a default resolution. The
patch is against 2.4.0-test10-pre3. Please consider applying.


J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department
of Electrical Engineering, Faculty of Information Technology and Systems,
Delft University of Technology, PO BOX 5031,  2600 GA Delft, The Netherlands
Phone: +31-15-2783635  Fax: +31-15-2781843  Email: J.A.K.Mouw@its.tudelft.nl
WWW: http://www-ict.its.tudelft.nl/~erik/

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Sun Oct 15 2000 - 21:00:28 EST