On Sat, Sep 16, 2000 at 07:27:01PM +0200, Frank van de Pol wrote:
>
> Just experienced a (reproducable) hang of the system when loading the
> drivers for my cdrom drives. (ide-cd and ide-scsi). System freezes
> completely; interupts / alt-sysreq is still working.
>
> Just before the lockup I get next message on my console:
>
> "
> scsi1 : SCSI host adapter emulation for IDE ATAPI devices
> scsi : 2 hosts.
> Vendor: E-IDE Model: CD-ROM 36X/AKU Rev: U21I
> Type: CD-ROM
> ANSI SCSI revision: 02
> Detected scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
> "
> <lockup....>
I tried to compile the sr_mod without the __init & __exit but this did (as
expected) to cure the problem.
The problem seems to reside in the ide-scsi driver; if the cdrom (sr_mod) is
not loaded, I get during initialisation of the ide-scsi module a lockup
after printing the information about the 1st host (dies after the 'Type:
CDROM' line). Probing the 2nd host seems to fail.
Frank.
-- +---- --- -- - - - - |Frank van de Pol -o) | FvdPol@home.nl /\\ | _\_v |Linux - Why use Windows, since there is a door? - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Sep 23 2000 - 21:00:14 EST