Re: eepro100 probs

From: Admin Mailing Lists (mlist@intergrafix.net)
Date: Thu May 11 2000 - 12:52:11 EST


i've also had problems with the driver on kernels up to an including
2.2.14 on an intel PR440FX motherboard. Connected to a HP
procurve 8000M switch. It constantly reports "Excessive CRC/Alignment
Errors".
Put 2.2.15pre18 on the one machine and the errors for that machine
stopped. I haven't tried any other kernels since then

-Tony
.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-.
Anthony J. Biacco Network Administrator/Engineer
admin@intergrafix.net Intergrafix Internet Services

    "Dream as if you'll live forever, live as if you'll die today"
http://cygnus.ncohafmuta.com http://www.intergrafix.net
.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-.

On Tue, 9 May 2000 lamont@icopyright.com wrote:

>
> I had similar problems with stalls and ring dumps with the driver from
> 2.2.14-6.0.1 from RedHat:
>
> eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
> eepro100.c: $Revision: 1.18 $ 1999/12/29 Modified by Andrey V. Savochkin <saw@msu.ru>
>
> Replacing this driver with one from the 2.2.15-preX series appears to have
> gotten rid of the problem:
>
> eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
> eepro100.c: $Revision: 1.20.2.3 $ 2000/03/02 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
>
>
> On Tue, 9 May 2000, Matthew Kirkwood wrote:
> > Hi,
> >
> > We're seeing a stack of stalls with the eepro100
> > driver from Red Hat 6.2. Every so often (on my
> > machine, six times yesterday, but only twice so
> > far today) the interfaces hangs for a minute or
> > so and then returns to life.
> >
> > The machines this is happening on are identical,
> > and look like:
> >
> > 00:00.0 Host bridge: Acer Laboratories Inc. [ALi] M1541 (rev 04)
> > 00:01.0 PCI bridge: Acer Laboratories Inc. [ALi] M5243 (rev 04)
> > 00:02.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03)
> > 00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV] (rev c3)
> > 00:0f.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c1)
> > 00:12.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08)
> > 01:00.0 VGA compatible controller: ATI Technologies Inc Rage XL AGP (rev 65)
> >
> > Has the driver changed significantly since 15p7?
> > Would it be worth trying 2.3?
> >
> > Matthew.
> >
> >
> > eth0: Transmit timed out: status 0050 0000 at 378180/378208 command 000c0000.
> > eth0: Tx ring dump, Tx queue 378208 / 378180:
> > eth0: = 0 200ca000.
> > eth0: 1 000ca000.
> > eth0: 2 000ca000.
> > eth0: 3 000ca000.
> > eth0: * 4 000c0000.
> > eth0: 5 000ca000.
> > eth0: 6 000ca000.
> > eth0: 7 000ca000.
> > eth0: 8 200ca000.
> > eth0: 9 000ca000.
> > eth0: 10 000ca000.
> > eth0: 11 000ca000.
> > eth0: 12 000ca000.
> > eth0: 13 000ca000.
> > eth0: 14 000ca000.
> > eth0: 15 000ca000.
> > eth0: 16 200ca000.
> > eth0: 17 000ca000.
> > eth0: 18 000ca000.
> > eth0: 19 000ca000.
> > eth0: 20 000ca000.
> > eth0: 21 000ca000.
> > eth0: 22 000ca000.
> > eth0: 23 000ca000.
> > eth0: 24 200ca000.
> > eth0: 25 000ca000.
> > eth0: 26 000ca000.
> > eth0: 27 000ca000.
> > eth0: 28 000ca000.
> > eth0: 29 000ca000.
> > eth0: 30 000ca000.
> > eth0: 31 400ca000.
> > eth0: Printing Rx ring (next to receive into 411305, dirty index 411305).
> > eth0: 0 00000001.
> > eth0: 1 00000001.
> > eth0: 2 00000001.
> > eth0: 3 00000001.
> > eth0: 4 00000001.
> > eth0: 5 00000001.
> > eth0: 6 00000001.
> > eth0: 7 00000001.
> > eth0: l 8 c0000001.
> > eth0: *= 9 00000001.
> > eth0: 10 00000001.
> > eth0: 11 00000001.
> > eth0: 12 00000001.
> > eth0: 13 00000001.
> > eth0: 14 00000001.
> > eth0: 15 00000001.
> > eth0: 16 00000001.
> > eth0: 17 00000001.
> > eth0: 18 00000001.
> > eth0: 19 00000001.
> > eth0: 20 00000001.
> > eth0: 21 00000001.
> > eth0: 22 00000001.
> > eth0: 23 00000001.
> > eth0: 24 00000001.
> > eth0: 25 00000001.
> > eth0: 26 00000001.
> > eth0: 27 00000001.
> > eth0: 28 00000001.
> > eth0: 29 00000001.
> > eth0: 30 00000001.
> > eth0: 31 00000001.
> > eth0: PHY index 1 register 0 is 3000.
> > eth0: PHY index 1 register 1 is 7829.
> > eth0: PHY index 1 register 2 is 02a8.
> > eth0: PHY index 1 register 3 is 0154.
> > eth0: PHY index 1 register 4 is 05e1.
> > eth0: PHY index 1 register 5 is 41e1.
> > eth0: PHY index 1 register 21 is 0000.
> >
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.rutgers.edu
> > Please read the FAQ at http://www.tux.org/lkml/
> >
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
> Please read the FAQ at http://www.tux.org/lkml/
>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon May 15 2000 - 21:00:18 EST