Re: Cardbus + Tulip + Kernel 2.3.99-6

From: Alexander Ehlert (ehlert@phys.unsw.edu.au)
Date: Wed May 10 2000 - 22:58:57 EST


On Wed, 10 May 2000, David Hinds wrote:

> On Thu, May 11, 2000 at 12:57:46PM +1000, Alexander Ehlert wrote:
> >
> > May 11 12:38:34 frodo kernel: Intel PCIC probe:
> > May 11 12:38:34 frodo kernel: Intel i82365sl DF ISA-to-PCMCIA at port
> > 0x3e0 ofs 0x00, 2 sockets
>
> You're using the wrong socket driver. In the 2.3.* tree, the i82365
> driver only supports ISA bus bridges, and not CardBus bridges. You
> need to configure/load the "yenta" driver instead.

Ah ok, is it enough then to activate Cardbus Support under PCMCIA/Cardbus
Support? But doing this I got error messages that there is no 82365.o
driver module. So I assumed I have to compile that as well.

I try again..

Cheers, Alex

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon May 15 2000 - 21:00:17 EST