On Thu, 11 May 2000, Alexander Ehlert wrote:
> May 11 12:38:34 frodo kernel: Intel i82365sl DF ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
The above is not the kernel cardbus driver. To get that, you should
enable CardBus support, and _not_ enable i82365 support (the i82365
thing is the old 16-bit-only driver).
But maybe you're usingthe external PCMCIA package?
> May 11 12:38:37 frodo kernel: cs: socket 0 timed out during reset
This tends to be either a voltage mis-sense, or a card type mis-sense.
> 00:0a.0 CardBus bridge: Texas Instruments PCI1250 (rev 02)
> 00:0a.1 CardBus bridge: Texas Instruments PCI1250 (rev 02)
Texas Instrument tends to be the one that gets the voltage wrong the
easiest when the card is inserted at bootup. The driver tries to notice
this automatically, but..
> Ok, what else can I do to help debugging this?
> I don't have any clue about device drivers and kernel hacking..
Please check that you have cardbus on, and i82365 off (if you have the
in-kernel pcmcia services).
Linus
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon May 15 2000 - 21:00:17 EST