I thought I had tamed random lockups on my Abit BP6 mobo (2x400Mhz
Celeron overcloked to 433Mhz , 128Mb RAM, 2 ATA33, 1 ATA66 disks, Matrox
G200, SuSE 6.3) following a hint I found on this list. In fact, by
relaying mouse handling in X through gpm, the mouse+keyboard lockups
have not occurred anymore for more than six months.
But with these two pre-patches (I have been using prvious pre-patches
without problems) I have experienced three lockups. This time I have
messages in my logs. Finally, I have discovered some more hiccups in the
logs.
I hope this helps.
Carlo Scarfoglio
First the oopses: they occurred in X, while watching a small mpeg video
with mpeg_play or working with Midnight Commander, can't remember
exactly.
I post two of them, the first under pre7-3. the second under pre7-6.
May 5 19:30:00 carlocasa kernel: Unable to handle kernel NULL pointer
dereference at virtual address 00000004
May 5 19:30:00 carlocasa kernel: printing eip:
May 5 19:30:00 carlocasa kernel: c015713c
May 5 19:30:00 carlocasa kernel: *pde = 00000000
May 5 19:30:00 carlocasa kernel: Oops: 0000
May 5 19:30:00 carlocasa kernel: CPU: 0
May 5 19:30:00 carlocasa kernel: EIP: 0010:[__d_path+96/252]
May 5 19:30:00 carlocasa kernel: EFLAGS: 00010206
May 5 19:30:00 carlocasa kernel: eax: c377ca00 ebx: 00000fff ecx:
c2482ffe edx: c377c9e0
May 5 19:30:00 carlocasa kernel: esi: 00000002 edi: 00000000 ebp:
c4b907e0 esp: c249deec
May 5 19:30:00 carlocasa kernel: ds: 0018 es: 0018 ss: 0018
May 5 19:30:00 carlocasa kernel: Process fuser (pid: 399,
stackpage=c249d000)
May 5 19:30:00 carlocasa kernel: Stack: c249c000 00000002 c2482000
c4b907e0 c2482fff c0171e1b c377c9e0 00000000
May 5 19:30:00 carlocasa kernel: c12ba0e0 c13e78a0 c2482000
00001000 c53b2000 c53b24fc c53b24dc c2491100
May 5 19:30:00 carlocasa kernel: c249df67 00000001 c2482000
c249df64 c13bde3c c13bde3c c13bde1c c249c000
May 5 19:30:00 carlocasa kernel: Call Trace:
[proc_pid_read_maps+639/1308] [pid_maps_read+190/264] [sys_read+266/300]
[system_call+52/56]
May 5 19:30:00 carlocasa kernel: Code: 3b 57 04 74 07 8b 6a 0c 39 ea 75
14 8b 7c 24 1c 8b 47 08 39
May 7 12:07:07 carlocasa kernel: APIC error interrupt on CPU#1, should
never happen.
May 7 12:07:07 carlocasa kernel: ... APIC ESR0: 00000002
May 7 12:07:07 carlocasa kernel: ... APIC ESR1: 00000002
May 7 12:07:07 carlocasa kernel: ... bit 1: APIC Receive CS Error (hw
problem).
May 7 12:15:00 carlocasa kernel: Unable to handle kernel NULL pointer
dereference at virtual address 00000004
May 7 12:15:00 carlocasa kernel: printing eip:
May 7 12:15:00 carlocasa kernel: c014847c
May 7 12:15:00 carlocasa kernel: *pde = 00000000
May 7 12:15:00 carlocasa kernel: Oops: 0000
May 7 12:15:00 carlocasa kernel: CPU: 1
May 7 12:15:00 carlocasa kernel: EIP: 0010:[__d_path+96/252]
May 7 12:15:00 carlocasa kernel: EFLAGS: 00010202
May 7 12:15:00 carlocasa kernel: eax: c1ae7d80 ebx: 00000fff ecx:
c7c9cffe edx: c1ae7d60
May 7 12:15:00 carlocasa kernel: esi: 00000002 edi: 00000000 ebp:
c168aa20 esp: c7775ef4
May 7 12:15:00 carlocasa kernel: ds: 0018 es: 0018 ss: 0018
May 7 12:15:00 carlocasa kernel: Process fuser (pid: 2188,
stackpage=c7775000)
May 7 12:15:00 carlocasa kernel: Stack: c7774000 00000002 c7c9c000
c168aa20 c7c9cfff c016154b c1ae7d60 00000000
May 7 12:15:00 carlocasa kernel: c12da0e0 c12888a0 c7c9c000
00001000 c0978740 40015000 00000000 c0978740
May 7 12:15:00 carlocasa kernel: c7775f73 00000001 c7c9c000
c7775f70 c4ea40f8 c4ea40f8 c4ea40dc c7774000
May 7 12:15:00 carlocasa kernel: Call Trace:
[proc_pid_read_maps+687/1372] [pid_maps_read+40/48] [sys_read+234/268]
[system_call+52/56]
May 7 12:15:00 carlocasa kernel: Code: 3b 57 04 74 07 8b 6a 0c 39 ea 75
14 8b 7c 24 1c 8b 47 08 39
The following logs report problems occurred while accessing an HPFS
partition to launch Lotus 123 for Windows 3.1 with wine.
Apr 3 01:42:59 carlocasa kernel: HPFS: filesystem error: sector
00000002 not found in external anode ffffffff; remounting read-only
Apr 3 01:42:59 carlocasa kernel: kernel BUG at file.c:74!
Apr 3 01:42:59 carlocasa kernel: invalid operand: 0000
Apr 3 01:42:59 carlocasa kernel: CPU: 0
Apr 3 01:42:59 carlocasa kernel: EIP: 0010:[hpfs_get_block+100/216]
Apr 3 01:42:59 carlocasa kernel: EFLAGS: 00010292
Apr 3 01:42:59 carlocasa kernel: eax: 00000019 ebx: 00000400 ecx:
00000001 edx: 00000020
Apr 3 01:42:59 carlocasa kernel: esi: c23f7400 edi: c30ea6e0 ebp:
c5397eb0 esp: c5397e58
Apr 3 01:42:59 carlocasa kernel: ds: 0018 es: 0018 ss: 0018
Apr 3 01:42:59 carlocasa kernel: Process wine (pid: 15772,
stackpage=c5397000)
Apr 3 01:42:59 carlocasa kernel: Stack: c0294e86 c02951c8 0000004a
00000400 00000600 00000000 c0142543 c23f7400
Apr 3 01:42:59 carlocasa kernel: 00000002 c30ea6e0 00000001
c23f7400 00000400 00000000 00000600 c5397f54
Apr 3 01:42:59 carlocasa kernel: c5095000 c30ea7e0 c5397eb0
00000200 00000002 c30ea6e0 c5397f54 00000004
Apr 3 01:42:59 carlocasa kernel: Call Trace: [tvecs+90814/129880]
[tvecs+91648/129880] [__block_prepare_write+263/524]
[cont_prepare_write+507/724] [hpfs_get_block+0/216]
[hpfs_prepare_write+38/44] [hpfs_get_block+0/216]
Apr 3 01:42:59 carlocasa kernel: [generic_file_write+862/1276]
[hpfs_file_write+26/64] [sys_write+266/300] [error_code+45/56]
[system_call+52/56]
Apr 3 01:42:59 carlocasa kernel: Code: 0f 0b 83 c4 0c b8 fb ff ff ff eb
62 8b 46 4c 48 50 6a 01 8b
May 5 23:22:09 carlocasa kernel: HPFS: filesystem error: sector
00000002 not found in external anode ffffffff; remounting read-only
May 5 23:22:09 carlocasa kernel: kernel BUG at file.c:74!
May 5 23:22:09 carlocasa kernel: invalid operand: 0000
May 5 23:22:09 carlocasa kernel: CPU: 1
May 5 23:22:09 carlocasa kernel: EIP: 0010:[hpfs_get_block+100/216]
May 5 23:22:09 carlocasa kernel: EFLAGS: 00010292
May 5 23:22:09 carlocasa kernel: eax: 00000019 ebx: 00000400 ecx:
c02e3d84 edx: c02e3d84
May 5 23:22:09 carlocasa kernel: esi: c3a53380 edi: c2f34760 ebp:
c3165eb0 esp: c3165e58
May 5 23:22:09 carlocasa kernel: ds: 0018 es: 0018 ss: 0018
May 5 23:22:09 carlocasa kernel: Process wine (pid: 250,
stackpage=c3165000)
May 5 23:22:09 carlocasa kernel: Stack: c0297926 c0297ca8 0000004a
00000400 00000600 00000000 c0142e97 c3a53380
May 5 23:22:09 carlocasa kernel: 00000002 c2f34760 00000001
c3a53380 00000400 00000000 00000600 c3165f54
May 5 23:22:09 carlocasa kernel: c2f27000 c2f34860 c3165eb0
00000200 00000002 c2f34760 c3165f54 00000004
May 5 23:22:09 carlocasa kernel: Call Trace: [tvecs+99230/147096]
[tvecs+100128/147096] [__block_prepare_write+263/524]
[cont_prepare_write+507/724] [hpfs_get_block+0/216]
[hpfs_prepare_write+38/44] [hpfs_get_block+0/216]
May 5 23:22:09 carlocasa kernel: [generic_file_write+862/1276]
[hpfs_file_write+26/64] [sys_write+266/300] [error_code+45/56]
[system_call+52/56]
May 5 23:22:09 carlocasa kernel: Code: 0f 0b 83 c4 0c b8 fb ff ff ff eb
62 8b 46 4c 48 50 6a 01 8b
Then, the last problem, occurred with kernel pre6-7
Apr 4 21:36:53 carlocasa kernel: eip: c01bd0c8
Apr 4 21:36:53 carlocasa kernel: kernel BUG at
/usr/src/linux/include/asm/spinlock.h:80!
Apr 4 21:36:53 carlocasa kernel: invalid operand: 0000
Apr 4 21:36:53 carlocasa kernel: CPU: 1
Apr 4 21:36:53 carlocasa kernel: EIP: 0010:[ppp_file_read+564/1036]
Apr 4 21:36:53 carlocasa kernel: EFLAGS: 00010092
Apr 4 21:36:53 carlocasa kernel: eax: 00000038 ebx: c172c658 ecx:
c02e1744 edx: c5a41f7c
Apr 4 21:36:53 carlocasa kernel: esi: 00000000 edi: c172c664 ebp:
00000246 esp: c39a5ee4
Apr 4 21:36:53 carlocasa kernel: ds: 0018 es: 0018 ss: 0018
Apr 4 21:36:53 carlocasa kernel: Process TkUsr (pid: 2455,
stackpage=c39a5000)
Apr 4 21:36:53 carlocasa kernel: Stack: c02a2686 c02a2660 00000050
c39a4000 c389f000 c6b54720 c39a4000 c39a5f3c
Apr 4 21:36:53 carlocasa kernel: c172c66c fffffff5 c39a5f3c
c39a4000 01234567 c39a4000 00000000 00000000
Apr 4 21:36:53 carlocasa kernel: c39a5f3c 00000000 01234567
c39a4000 c172c674 c172c674 c39a5f3c c01bff7e
Apr 4 21:36:53 carlocasa kernel: Call Trace: [days_in_mo+3878/4196]
[days_in_mo+3840/4196] [ppp_unregister_channel+250/472]
[ppp_channel_read+32/44] [ppp_asynctty_read+38/52] [tty_read+279/444]
[sys_read+266/300]
Apr 4 21:36:53 carlocasa kernel: [error_code+45/56]
[system_call+52/56]
Apr 4 21:36:53 carlocasa kernel: Code: 0f 0b 83 c4 0c 8d 76 00 f0 0f ba
2f 00 0f 82 4e 20 0b 00 8b
This is my /var/log/boot.msg (kernel pre7-6)
Inspecting /boot/System.map
Loaded 14451 symbols from /boot/System.map.
Symbols match kernel version 2.3.99.
No module symbols loaded.
klogd 1.3-3, log source = ksyslog started.
<4>Linux version 2.3.99-pre7 (root@carlocasa) (gcc version egcs-2.91.66
19990314/Linux (egcs-1.1.2 release)) #1 SMP Sun May 7 01:53:23 CEST 2000
<4>e820: 0009fc00 @ 00000000 (usable)
<4>e820: 00000400 @ 0009fc00 (reserved)
<4>e820: 00010000 @ 000f0000 (reserved)
<4>e820: 00001000 @ fec00000 (reserved)
<4>e820: 00001000 @ fee00000 (reserved)
<4>e820: 00010000 @ ffff0000 (reserved)
<4>e820: 07f00000 @ 00100000 (usable)
<4>Scan SMP from c0000000 for 1024 bytes.
<4>Scan SMP from c009fc00 for 1024 bytes.
<4>Scan SMP from c00f0000 for 65536 bytes.
<4>found SMP MP-table at 000f5b90
<4>hm, page 000f5000 reserved twice.
<4>hm, page 000f6000 reserved twice.
<4>hm, page 000f1000 reserved twice.
<4>hm, page 000f2000 reserved twice.
<4>On node 0 totalpages: 32768
<4>zone(0): 4096 pages.
<4>zone(1): 28672 pages.
<4>zone(2): 0 pages.
<4>Intel MultiProcessor Specification v1.1
<4> Virtual Wire compatibility mode.
<4>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
<4>Processor #0 Pentium(tm) Pro APIC version 17
<4> Floating point unit present.
<4> Machine Exception supported.
<4> 64 bit compare & exchange supported.
<4> Internal APIC present.
<4> Bootup CPU
<4>Processor #1 Pentium(tm) Pro APIC version 17
<4> Floating point unit present.
<4> Machine Exception supported.
<4> 64 bit compare & exchange supported.
<4> Internal APIC present.
<4>Bus #0 is PCI
<4>Bus #1 is PCI
<4>Bus #2 is ISA
<4>I/O APIC #2 Version 17 at 0xFEC00000.
<4>Int: type 3, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 00
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 01, APIC ID 2, APIC INT 01
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 02
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 03, APIC ID 2, APIC INT 03
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 04, APIC ID 2, APIC INT 04
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 06, APIC ID 2, APIC INT 06
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 07, APIC ID 2, APIC INT 07
<4>Int: type 0, pol 1, trig 1, bus 2, IRQ 08, APIC ID 2, APIC INT 08
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0c, APIC ID 2, APIC INT 0c
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0d, APIC ID 2, APIC INT 0d
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0e, APIC ID 2, APIC INT 0e
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0f, APIC ID 2, APIC INT 0f
<4>Int: type 0, pol 3, trig 3, bus 2, IRQ 09, APIC ID 2, APIC INT 10
<4>Int: type 0, pol 3, trig 3, bus 2, IRQ 05, APIC ID 2, APIC INT 11
<4>Int: type 0, pol 3, trig 3, bus 2, IRQ 0b, APIC ID 2, APIC INT 12
<4>Int: type 0, pol 3, trig 3, bus 2, IRQ 0a, APIC ID 2, APIC INT 13
<4>Lint: type 3, pol 0, trig 0, bus 2, IRQ 00, APIC ID ff, APIC LINT 00
<4>Lint: type 1, pol 0, trig 0, bus 2, IRQ 00, APIC ID ff, APIC LINT 01
<4>Processors: 2
<4>mapped APIC to ffffe000 (fee00000)
<4>mapped IOAPIC to ffffd000 (fec00000)
<4>Initializing CPU#0
<4>Detected 431937391 Hz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 861.80 BogoMIPS
<4>Memory: 126060k/131072k available (1696k kernel code, 4624k reserved,
145k data, 200k init, 0k highmem)
<4>Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
<4>Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
<6>Checking 386/387 coupling... OK, FPU using exception 16 error
reporting.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.36 (20000221) Richard Gooch (rgooch@atnf.csiro.au)
<4>CPU0: Intel Mobile Pentium II stepping 05
<4>per-CPU timeslice cutoff: 357.11 usecs.
<4>Getting VERSION: 40011
<4>Getting VERSION: 40011
<4>Getting LVT0: 700
<4>Getting LVT1: 400
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>CPU present map: 3
<4>Booting processor 1/1 eip 2000
<4>Setting warm reset code and vector.
<4>1.
<4>2.
<4>3.
<4>Asserting INIT.
<4>Waiting for send to finish...
<4>+Deasserting INIT.
<4>Waiting for send to finish...
<4>+#startup loops: 2.
<4>Sending STARTUP #1.
<4>After apic_write.
<4>Startup point 1.
<4>Waiting for send to finish...
<4>+Initializing CPU#1
<4>CPU#1 (phys ID: 1) waiting for CALLOUT
<4>Sending STARTUP #2.
<4>After apic_write.
<4>Startup point 1.
<4>Waiting for send to finish...
<4>+After Startup.
<4>Before Callout 1.
<4>After Callout 1.
<4>CALLIN, before setup_local_APIC().
<4>masked ExtINT on CPU#1
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Calibrating delay loop... 861.80 BogoMIPS
<4>Stack at about c12d7fbc
<4>OK.
<4>CPU1: Intel Mobile Pentium II stepping 05
<4>CPU has booted.
<4>Before bogomips.
<6>Total of 2 processors activated (1723.60 BogoMIPS).
<4>Before bogocount - setting activated=1.
<4>Boot done.
<4>ENABLING IO-APIC IRQs
<6>...changing IO-APIC physical APIC ID to 2 ... ok.
<4>Synchronizing Arb IDs.
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-10, 2-11, 2-20, 2-21, 2-22,
2-23 not connected.
<6>..TIMER: vector=81 pin1=2 pin2=0
<6>activating NMI Watchdog ... done.
<7>number of MP IRQ sources: 16.
<7>number of IO-APIC #2 registers: 24.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02000000
<7>....... : physical APIC id: 02
<7>.... register #01: 00170011
<7>....... : max redirection entries: 0017
<7>....... : IO APIC version: 0011
<7>.... register #02: 00000000
<7>....... : arbitration: 00
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 000 00 1 0 0 0 0 0 0 00
<7> 01 0FF 0F 0 0 0 0 0 1 1 59
<7> 02 0FF 0F 0 0 0 0 0 1 1 51
<7> 03 0FF 0F 0 0 0 0 0 1 1 61
<7> 04 0FF 0F 0 0 0 0 0 1 1 69
<7> 05 000 00 1 0 0 0 0 0 0 00
<7> 06 0FF 0F 0 0 0 0 0 1 1 71
<7> 07 0FF 0F 0 0 0 0 0 1 1 79
<7> 08 0FF 0F 0 0 0 0 0 1 1 81
<7> 09 000 00 1 0 0 0 0 0 0 00
<7> 0a 000 00 1 0 0 0 0 0 0 00
<7> 0b 000 00 1 0 0 0 0 0 0 00
<7> 0c 0FF 0F 0 0 0 0 0 1 1 89
<7> 0d 000 00 1 0 0 0 0 0 0 00
<7> 0e 0FF 0F 0 0 0 0 0 1 1 91
<7> 0f 0FF 0F 0 0 0 0 0 1 1 99
<7> 10 0FF 0F 1 1 0 1 0 1 1 A1
<7> 11 0FF 0F 1 1 0 1 0 1 1 A9
<7> 12 0FF 0F 1 1 0 1 0 1 1 B1
<7> 13 0FF 0F 1 1 0 1 0 1 1 B9
<7> 14 000 00 1 0 0 0 0 0 0 00
<7> 15 000 00 1 0 0 0 0 0 0 00
<7> 16 000 00 1 0 0 0 0 0 0 00
<7> 17 000 00 1 0 0 0 0 0 0 00
<7>IRQ to pin mappings:
<7>IRQ0 -> 2
<7>IRQ1 -> 1
<7>IRQ3 -> 3
<7>IRQ4 -> 4
<7>IRQ5 -> 17
<7>IRQ6 -> 6
<7>IRQ7 -> 7
<7>IRQ8 -> 8
<7>IRQ9 -> 16
<7>IRQ10 -> 19
<7>IRQ11 -> 18
<7>IRQ12 -> 12
<7>IRQ13 -> 13
<7>IRQ14 -> 14
<7>IRQ15 -> 15
<6>.................................... done.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 431.9852 MHz.
<4>..... host bus clock speed is 71.9974 MHz.
<4>cpu: 0, clocks: 719974, slice: 239991
<4>CPU0<C0:719968,C:479968,D:9,S:239991,C:719974>
<4>cpu: 1, clocks: 719974, slice: 239991
<4>CPU1<C0:719968,C:239984,D:2,S:239991,C:719974>
<4>checking TSC synchronization across CPUs: passed.
<4>Setting commenced=1, go go go
<4>mtrr: your CPUs had inconsistent fixed MTRR settings
<4>mtrr: probably your BIOS does not setup all CPUs
<4>PCI: PCI BIOS revision 2.10 entry at 0xfb440, last bus=1
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<4>PCI: Using IRQ router PIIX [8086/7000] at 00:07.0
<4>PCI: Found IRQ 10 for device 00:07.2
<4>PCI: The same IRQ used for device 00:11.0
<6>Limiting direct PCI/PCI transfers.
<6>Linux NET4.0 for Linux 2.3
<6>Based upon Swansea University Computer Society NET3.039
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP
<4>IP: routing cache hash table of 1024 buckets, 8Kbytes
<4>TCP: Hash tables configured (established 8192 bind 8192)
<4>Starting kswapd v1.6
<6>0x378: FIFO is 16 bytes
<6>0x378: writeIntrThreshold is 16
<6>0x378: readIntrThreshold is 16
<7>0x378: PWord is 8 bits
<7>0x378: Interrupts are ISA-Pulses
<7>0x378: ECP port cfgA=0x10 cfgB=0x48
<7>0x378: ECP settings irq=7 dma=<none or set by other means>
<6>parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,EPP,ECP]
<7>parport0: cpp_daisy: aa5500ff(38)
<7>parport0: assign_addrs: aa5500ff(38)
<7>parport0: cpp_daisy: aa5500ff(38)
<7>parport0: assign_addrs: aa5500ff(38)
<6>parport1: PC-style at 0x278 [PCSPP]
<7>parport1: cpp_daisy: aa5500ff(38)
<7>parport1: assign_addrs: aa5500ff(38)
<7>parport1: cpp_daisy: aa5500ff(38)
<7>parport1: assign_addrs: aa5500ff(38)
<4>i2c-core.o: i2c core module
<4>i2c-dev.o: i2c /dev entries driver module
<4>i2c-core.o: driver i2c-dev dummy driver registered.
<4>pty: 256 Unix98 ptys configured
<6>lp0: using parport0 (interrupt-driven).
<6>lp1: using parport1 (polling).
<6>loop: registered device at major 7
<6>loop: enabling 8 loop devices
<6>Uniform Multi-Platform E-IDE driver Revision: 6.30
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
<4>PIIX4: IDE controller on PCI bus 00 dev 39
<4>PIIX4: not 100% native mode: will probe irqs later
<4> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
<4> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
<4>HPT366: onboard version of chipset, pin1=1 pin2=2
<4>HPT366: IDE controller on PCI bus 00 dev 98
<4>HPT366: not 100% native mode: will probe irqs later
<4> ide2: BM-DMA at 0xd800-0xd807, BIOS settings: hde:DMA, hdf:pio
<4>HPT366: IDE controller on PCI bus 00 dev 99
<4>HPT366: not 100% native mode: will probe irqs later
<4> ide3: BM-DMA at 0xe400-0xe407, BIOS settings: hdg:pio, hdh:pio
<4>hda: QUANTUM FIREBALL_TM2550A, ATA DISK drive
<4>hdc: IBM-DHEA-38451, ATA DISK drive
<4>hde: IBM-DPTA-372050, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>ide2 at 0xd000-0xd007,0xd402 on irq 11
<6>hda: 5008752 sectors (2564 MB) w/76KiB Cache, CHS=621/128/63, DMA
<6>hdc: 16514064 sectors (8455 MB) w/472KiB Cache, CHS=16383/16/63,
UDMA(33)
<6>hde: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=39770/16/63,
UDMA(66)
<6>Partition check:
<6> hda: hda1 hda2 < hda5 hda6 > hda3
<6> hdc: [PTBL] [1027/255/63] hdc1 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 >
<6> hde: hde1 hde2
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>(scsi0) <Adaptec AIC-7850 SCSI host adapter> found at PCI 0/11/0
<6>(scsi0) Narrow Channel, SCSI ID=7, 3/255 SCBs
<6>(scsi0) Downloading sequencer code... 415 instructions downloaded
<4>scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI)
5.2.0/3.2.4
<4> <Adaptec AIC-7850 SCSI host adapter>
<4>scsi : 1 host.
<6>(scsi0:0:2:0) Synchronous at 10.0 Mbyte/sec, offset 15.
<4> Vendor: SCSI-CD Model: ReWritable-2x2x6 Rev: 2.00
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
<6>(scsi0:0:3:0) Synchronous at 10.0 Mbyte/sec, offset 15.
<4> Vendor: TEAC Model: CD-ROM CD-532S Rev: 1.0A
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>Detected scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 0
<4>scsi : detected 2 SCSI cdroms total.
<4>sr0: scsi3-mmc drive: 2x/6x writer cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.07
<4>sr1: scsi3-mmc drive: 2x/6x xa/form2 cdda tray
<5>NTFS version 000502
<6>Serial driver version 4.93 (2000-03-20) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>ttyS02 at 0x03e8 (irq = 4) is a 16450
<6>ttyS03 at 0x02e8 (irq = 3) is a 16450
<6>Real Time Clock Driver v1.10c
<6>ppdev: user-space parallel port driver
<6>PPP generic driver version 2.4.1
<6>ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker
http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
<4>eth0: RealTek RTL-8029 found at 0xcc00, IRQ 10, 00:20:18:39:CF:17.
<6>PPP Deflate Compression module registered
<6>es1371: version v0.25 time 01:54:23 May 7 2000
<6>es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x08
<6>es1371: found es1371 rev 8 at io 0xc800 irq 5
<6>es1371: features: joystick 0x0
<6>ac97_codec: AC97 Audio codec, vendor id1: 0x8384, id2: 0x7609
(SigmaTel STAC9721/23)
<4>VFS: Mounted root (ext2 filesystem) readonly.
<4>Freeing unused kernel memory: 200k freed
<6>Adding Swap: 136512k swap-space (priority -1)
<6>Adding Swap: 128484k swap-space (priority -2)
<4>HPFS: filesystem error: improperly stopped; remounting read-only
<4>HPFS: filesystem error: improperly stopped; remounting read-only
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun May 07 2000 - 21:00:21 EST