On Thu, 4 May 2000 14:41:06 -0700,
Brian Craft <bcboy@cisco.com> wrote:
>E.g. if I ping a remote machine, the icmp echos go out, and return in a
>few ms. I can dump them with the kdebug option in pppd. The payloads look
>ok -- I can see the ip's and the icmp data. While ping runs they arrive
>every few ms in syslog, but ping only sees the first one after 1 minute, the
>2nd one after 2 minutes, etc. They arrive in order, none missing.
Sounds like the packets are not leaving the serial port when you
expect. I have seen similar symptoms (long delays between characters)
on serial consoles after Redhat's kudzu has done its probe for new
hardware. Disabling kudzu and rebooting fixed the problem, serial
consoles that were issuing characters at < 1200 bps jumped to the
correct 115200 bps.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun May 07 2000 - 21:00:16 EST