On Mon, 20 Mar 2000, J.W. Hoogervorst wrote:
> It's the brand of the card - on it is just this CMD648 chip, some other
> components and an rom socket, currently without BIOS, but with it the card
> doesn't work either (the bios is out because i am using the shared isa slot
> beside it and needed the space for an connector that was just too high - who
> says you can't use both slots of an shared slot? :-)
I do, because there is not a know way to force the CHIPSET into action!
>
> Jeroen
>
> > On Mon, 20 Mar 2000, J.W. Hoogervorst wrote:
> >
> > > I am having the same problem, but with yet another brand (seems CMD took
> > > your advice very seriously :)
> > > It's an IOI card, currently without bios, but it doesn't give
> > me UDMA with
> >
> > What is an "IOI card"???
> >
> > > an bios either... In fact, it only gives me PIO... it's so slooowwww
> > > -( hdparm gives 1.something MB per second. tried ide2=ata66,
> > but is doesn't
> > > work either.
> > >
> > > The drive I am using is the 5400 rpm version of the 40GB Maxtor.
> > >
> > > Jeroen
> > >
> >
> > Andre Hedrick
> > The Linux ATA/IDE guy
> >
>
Andre Hedrick
The Linux ATA/IDE guy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Mar 23 2000 - 21:00:30 EST