Re: memory tester and BP6 problems

From: Daniel J Blueman (daniel.j.blueman@stud.umist.ac.uk)
Date: Fri Mar 10 2000 - 12:07:35 EST


Hi John,

> Can anyone recommend a good app to stress test the memory in my
> Linux box? I'm getting these strange lockups in a BP6 where
> the box locks hard, usually emitting a constant beep when it's
> locked. When I reboot it it usually doesn't come up for about
> five minutes but instead makes a beep pattern that is alternating
> a high and lower pitch beep continuously. Never posts. It
> usually stays up for anywhere from a day to a week. Not
> overclocked, happens with any kernel config and I've got my ram
> settings at the most conservative. Also, the temperature stays
> anywhere from 29C - 34C on the CPU's and in the system as reported
> by lm_sensors and looking at logs of the temps it is never overly
> hot when it dies.

Can you measure the system temperature (ie the Intel 440BX north bridge)
from the BIOS?
 - I know it gets really hot on the BP6.

Check the heatsink on it is getting adequate ventilation, and try adding a
little fan too

Dan
__________________________
Daniel J Blueman
Undergraduate - BSc Computing Science
UMIST university - Manchester
Direct line: 0161 933 3569
Mobile: 07775 583766
Email: daniel.j.blueman@stud.umist.ac.uk
SMS: daniel.j.blueman@sms.genie.co.uk

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Wed Mar 15 2000 - 21:00:18 EST