On Fri, Mar 03 2000, Marco Meloni wrote:
>
> I just compiled kernel 2.3.49 but things are going in the same way.
> This is the output of the hdparm -d 1 /dev/hda command:
>
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: DMA disabled
> ide0: reset: success
>
> obviously, I compiled with the experimental support for via chipset
> and the cable is the right one needed for ata/66.
The cable might be the right one, but badcrc still indicates that
it is not good enough. Don't go with border line cable lengths
and quality, especially not for ata-66.
-- * Jens Axboe <axboe@suse.de> * Linux CD-ROM Maintainer * http://www.kernel.dk- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Mar 07 2000 - 21:00:16 EST