I get a lost interrupt on hdb when I attempt to master an isoimage from
my IDE Cdrom(hdc) to hdb(a western digital) with
XCDRoast(http://www.fh-muenchen.de/rz/xcdroast)
I include the scsi info because XCDroast accesses my 4-cd Scsi changer
and Scsi CD writing device.(not in this operation however)
**Here's to hoping there were fewer changes in the 2.2.x kernels.**
Tyan Tsunami-BX chipset, Kernel 2.2.14, Redhat 6.1,xcdroast 0.96e-ex
Previous working Config-Kernel 2.2.10, Redhat 6.0, xcdroast 0.96d
**Dmesg**
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: WDC AC14300R, ATA DISK drive
hdb: WDC AC14300R, ATA DISK drive
hdc: DELTA OPC-K101/ST1 F/W by OIPD, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: WDC AC14300R, 4112MB w/512kB Cache, CHS=524/255/63
hdb: WDC AC14300R, 4112MB w/512kB Cache, CHS=524/255/63
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
(scsi0) <Adaptec AHA-2940A Ultra SCSI host adapter> found at PCI 18/0
(scsi0) Narrow Channel, SCSI ID=7, 3/255 SCBs
(scsi0) Downloading sequencer code... 413 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.21/3.2.4
<Adaptec AHA-2940A Ultra SCSI host adapter>
scsi : 1 host.
(scsi0:0:2:0) Synchronous at 10.0 Mbyte/sec, offset 15.
Vendor: NAKAMICH Model: MJ-4.8S Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
Vendor: NAKAMICH Model: MJ-4.8S Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 2, lun 1
Vendor: NAKAMICH Model: MJ-4.8S Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr2 at scsi0, channel 0, id 2, lun 2
Vendor: NAKAMICH Model: MJ-4.8S Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr3 at scsi0, channel 0, id 2, lun 3
(scsi0:0:4:0) Synchronous at 4.0 Mbyte/sec, offset 15.
Vendor: SAF Model: CD-R2004 Rev: 1.1d
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr4 at scsi0, channel 0, id 4, lun 0
scsi : detected 5 SCSI cdroms total.
Uniform CDROM driver Revision: 2.56
(scsi0:0:2:0) Performing Domain validation.
(scsi0:0:2:0) Successfully completed Domain validation.
Partition check:
hda: hda1 hda2
hdb: hdb1
**Interrupts**
CPU0
0: 61698629 XT-PIC timer
1: 69718 XT-PIC keyboard
2: 0 XT-PIC cascade
9: 1700875 XT-PIC eth0
11: 119 XT-PIC aic7xxx
12: 378563 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 4598502 XT-PIC ide0
15: 21381 XT-PIC ide1
NMI: 0
**Modules**
ide-cd 23208 1 (autoclean)
isofs 17400 1 (autoclean)
ipx 12476 1 (autoclean)
tulip 31584 1 (autoclean)
**Pci**
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel 440BX - 82443BX Host (rev 3).
Medium devsel. Master Capable. Latency=64.
Prefetchable 32 bit memory at 0xf8000000 [0xf8000008].
Bus 0, device 1, function 0:
PCI bridge: Intel 440BX - 82443BX AGP (rev 3).
Medium devsel. Master Capable. Latency=64. Min Gnt=136.
Bus 0, device 7, function 0:
ISA bridge: Intel 82371AB PIIX4 ISA (rev 2).
Medium devsel. Fast back-to-back capable. Master Capable. No
bursts.
Bus 0, device 7, function 1:
IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable.
Latency=64.
I/O at 0xffa0 [0xffa1].
Bus 0, device 7, function 2:
USB Controller: Intel 82371AB PIIX4 USB (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable.
Latency=64.
I/O at 0xef80 [0xef81].
Bus 0, device 7, function 3:
Bridge: Intel 82371AB PIIX4 ACPI (rev 2).
Medium devsel. Fast back-to-back capable.
Bus 0, device 17, function 0:
Ethernet controller: DEC DC21140 (rev 32).
Medium devsel. Fast back-to-back capable. IRQ 9. Master
Capable. Latency=255. Min Gnt=20.Max Lat=40.
I/O at 0xec00 [0xec01].
Non-prefetchable 32 bit memory at 0xffafef80 [0xffafef80].
Bus 0, device 18, function 0:
SCSI storage controller: Adaptec AIC-7861 (rev 1).
Medium devsel. Fast back-to-back capable. IRQ 11. Master
Capable. Latency=64. Min Gnt=4.Max Lat=4.
I/O at 0xe800 [0xe801].
Non-prefetchable 32 bit memory at 0xffaff000 [0xffaff000].
Bus 1, device 0, function 0:
VGA compatible controller: Silicon Integrated Systems Unknown device
(rev 11).
Vendor id=1039. Device id=6326.
Medium devsel. IRQ 10. Master Capable. Latency=64. Min Gnt=2.
Prefetchable 32 bit memory at 0xf6000000 [0xf6000008].
Non-prefetchable 32 bit memory at 0xff9f0000 [0xff9f0000].
I/O at 0xdc00 [0xdc01].
**Config**
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_IDEDMA_AUTO is not set
Need more infos? Let me know.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Feb 07 2000 - 21:00:07 EST