On Mon, Oct 02, 2000 at 09:24:58AM -0500, Jeff Garzik wrote:
> If this change broke your DMA enabling, I think there are other bugs
> lurking in the code...
>
This change also broke CMD646 IDE on alpha lx164.
CMD646: IDE controller on PCI bus 00 dev 58
CMD646: chipset revision 1
CMD646: chipset revision 0x01, MultiWord DMA Limited, IRQ workaround enabled
CMD646: 100% native mode on irq 21
ide0: BM-DMA at 0x9000-0x9007, BIOS settings: hda:pio, hdb:DMA
ide1: BM-DMA at 0x9008-0x900f, BIOS settings: hdc:pio, hdd:pio
hdb: ATAPI CD-ROM DRIVE 40X MAXIMUM, ATAPI CDROM drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0 at 0x1f0-0x1f7,0x3f6 on irq 21
No IDE interrupts...
With the change reverted:
CMD646: IDE controller on PCI bus 00 dev 58
CMD646: chipset revision 1
CMD646: not 100% native mode: will probe irqs later
CMD646: chipset revision 0x01, MultiWord DMA Limited, IRQ workaround enabled
ide0: BM-DMA at 0x9000-0x9007, BIOS settings: hda:pio, hdb:DMA
ide1: BM-DMA at 0x9008-0x900f, BIOS settings: hdc:pio, hdd:pio
hdb: ATAPI CD-ROM DRIVE 40X MAXIMUM, ATAPI CDROM drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
IDE works again.
Ivan.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Oct 07 2000 - 21:00:10 EST