The subject tells everything:
here is the boot log of test8:
fb0: MATROX VGA frame buffer device
pty: 512 Unix98 ptys configured
ISDN subsystem Rev: 1.111/1.93/1.135/1.77/1.21/1.5
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (kernel)
HiSax: Layer1 Revision 2.39
HiSax: Layer2 Revision 2.23
HiSax: TeiMgr Revision 2.15
HiSax: Layer3 Revision 2.14
HiSax: LinkLayer Revision 2.47
HiSax: Approval certification valid
HiSax: Approved with ELSA Microlink PCI cards
HiSax: Approved with Eicon Technology Diva 2.01 PCI cards
HiSax: Approved with Sedlbauer Speedfax + cards
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
HiSax: W6692 driver Rev. 1.7
Found: AsusCom TA XXX, I/O base: 0xd400, irq: 11
HiSax: TA XXX config irq:11 I/O:d400
W6692: Winbond W6692 version (0): W6692 V00
W6692 ISTA=0x0
W6692 IMASK=0xFF
W6692 D_EXIR=0x0
W6692 D_EXIM=0xFF
W6692 D_RSTA=0xA0
Winbond 6692: IRQ 11 count 0
Winbond 6692: IRQ 11 count 4
HiSax: DSS1 Rev. 2.29
HiSax: 2 channels added
HiSax: MAX_WAITING_CALLS added
Uniform Multi-Platform E-IDE driver Revision: 6.31
and here is what test9-pre7 shows instead:
28x481 23:49:14 penny kernel: fb0: MATROX VGA frame buffer device
Oct 1 23:49:14 penny kernel: pty: 512 Unix98 ptys configured
Oct 1 23:49:14 penny kernel: ISDN subsystem Rev: 1.111/1.93/1.135/1.77/1.21/1.5
Oct 1 23:49:14 penny kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
O
Is there something that is changed and that I should know ?
Pf
--------------------------------------------------------------------------------- Pierfrancesco Caci | ik5pvx | mailto:p.caci@tin.it - http://gusp.dyndns.org Firenze - Italia | Office for the Complication of Otherwise Simple Affairs Linux penny 2.4.0-test8 #1 Sun Oct 1 20:23:27 CEST 2000 i686 unknown - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Oct 07 2000 - 21:00:08 EST