Re: 2.3.34 ide-cdrom error

Ted Sikora (tsikora@home.com)
Wed, 29 Dec 1999 23:43:52 -0500

Andre Hedrick wrote:
>
> That is because I have the noise level set high to figure out the final
> design for the init process. It is obvious that I have a few adjustments
> to make.

No hurry. Just making sure your aware of all/any problems.

>
> On Thu, 23 Dec 1999, Ted Sikora wrote:
>
> > Following error still exists in 2.3.34 ide cdrom:
> >
> > hdc: ide_wait_noerr: status=0x51 { DriveReady SeekComplete Error }
> > hdc: ide_wait_noerr: error=0x04
> > hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error
> > }
> > hdc: set_drive_speed_status: error=0x04
> > hdc: ATAPI 5X CD-ROM drive, 240kB Cache
> > Uniform CD-ROM driver Revision: 3.06
> >
> > 2.2.13/2.2.14pre.x kernels are fine.
> >

--
Ted Sikora
Jtl Development Group 
tsikora@powerusersbbs.com
http://powerusersbbs.com


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/