I'm not on the list, but I was hoping someone could help me faster than
if I stumble through the code. Basically, with 2.3.29 when I install
the ide-scsi module I get all luns (0-7) registered for each CD-ROM. I
have a CD-ROM and a recorder and they get registered as follows:
Dec 3 10:30:39 i586 kernel: Vendor: MITSUMI Model:
CR-2801TE Rev: 1.07
Dec 3 10:30:39 i586 kernel: Type:
CD-ROM ANSI SCSI revision: 02
Dec 3 10:30:39 i586 kernel: Vendor: MITSUMI Model:
CR-2801TE Rev: 1.07
Dec 3 10:30:39 i586 kernel: Type:
CD-ROM ANSI SCSI revision: 02
Dec 3 10:30:39 i586 kernel: Vendor: MITSUMI Model:
CR-2801TE Rev: 1.07
Dec 3 10:30:39 i586 kernel: Type:
CD-ROM ANSI SCSI revision: 02
Dec 3 10:30:39 i586 kernel: Vendor: MITSUMI Model:
CR-2801TE Rev: 1.07
Dec 3 10:30:39 i586 kernel: Type:
CD-ROM ANSI SCSI revision: 02
Dec 3 10:30:39 i586 kernel: Vendor: MITSUMI Model:
CR-2801TE Rev: 1.07
Dec 3 10:30:39 i586 kernel: Type:
CD-ROM ANSI SCSI revision: 02
Dec 3 10:30:39 i586 kernel: Vendor: MITSUMI Model:
CR-2801TE Rev: 1.07
Dec 3 10:30:39 i586 kernel: Type:
CD-ROM ANSI SCSI revision: 02
Dec 3 10:30:39 i586 kernel: Vendor: MITSUMI Model:
CR-2801TE Rev: 1.07
Dec 3 10:30:39 i586 kernel: Type:
CD-ROM ANSI SCSI revision: 02
Dec 3 10:30:39 i586 kernel: Vendor: MITSUMI Model:
CR-2801TE Rev: 1.07
Dec 3 10:30:39 i586 kernel: Type:
CD-ROM ANSI SCSI revision: 02
Dec 3 10:30:39 i586 kernel: Vendor: COMPAQ Model:
CRD-8322B Rev: 1.03
Dec 3 10:30:39 i586 kernel: Type:
CD-ROM ANSI SCSI revision: 02
Dec 3 10:30:39 i586 kernel: Vendor: COMPAQ Model:
CRD-8322B Rev: 1.03
Dec 3 10:30:39 i586 kernel: Type:
CD-ROM ANSI SCSI revision: 02
Dec 3 10:30:39 i586 kernel: Vendor: COMPAQ Model:
CRD-8322B Rev: 1.03
Dec 3 10:30:39 i586 kernel: Type:
CD-ROM ANSI SCSI revision: 02
Dec 3 10:30:39 i586 kernel: Vendor: COMPAQ Model:
CRD-8322B Rev: 1.03
Dec 3 10:30:39 i586 kernel: Type:
CD-ROM ANSI SCSI revision: 02
Dec 3 10:30:39 i586 kernel: Vendor: COMPAQ Model:
CRD-8322B Rev: 1.03
Dec 3 10:30:39 i586 kernel: Type:
CD-ROM ANSI SCSI revision: 02
Dec 3 10:30:39 i586 kernel: Vendor: COMPAQ Model:
CRD-8322B Rev: 1.03
Dec 3 10:30:39 i586 kernel: Type:
CD-ROM ANSI SCSI revision: 02
Dec 3 10:30:39 i586 kernel: Vendor: COMPAQ Model:
CRD-8322B Rev: 1.03
Dec 3 10:30:39 i586 kernel: Type:
CD-ROM ANSI SCSI revision: 02
Dec 3 10:30:39 i586 kernel: Vendor: COMPAQ Model:
CRD-8322B Rev: 1.03
Dec 3 10:30:39 i586 kernel: Type:
CD-ROM ANSI SCSI revision: 02
When this happens, all the scd0-scd7 point to the first drive. I'm
trying to fix it so they only register once. This does not happen with
my zip drive by the way.
Can anyone give me some pointers on fixing this?
TIA,
Sean
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/