my Advance 2941U Ultra-SCSI Controller (ACARD/AEC6712U/ATP870UW-C)
does not work, not as modul and not resident in the kernel (RH 6.0,
Kernel 2.2.13/2.2.14pre)
Always the same error message:
: aec671x_detect:
: ACARD AEC-671X PCI Ultra/W SCSI-3 Host Adapter: 0 IO:e400,
IRQ:11.
: ID: 2 YAMAHA CRW6416S 1.0c
: ID: 3 HP C6270A 3828
ID: 6 iomega jaz 1GB H.71
: ID: 7 Host Adapter
: scsi0 : ACARD AEC-6710/6712 PCI Ultra/W SCSI-3 Adapter Driver V1.0
: scsi : 1 host.
: scsi : aborting command due to timeout : pid 2, scsi0, channel 0, id
2,
lun 0 0x00 00 00 00 00 00
: workingu=1 last_cmd=2 quhdu=1 quendu=1 r 0= 6 r 1=2c r 2=cf r 3= 0
r 4= 0
r 5= 0 r 6= 0 r 7= 0 r 8= 0 r 9= 0 r a= 0 r b= 0 r c= 0 r d= 0 r e=
0
r f= 0 r10=36 r11=20 r12= 0 r13= 1 r14= 0 r15= 2 r16=80 r1c=a3
r1f=80
in_snd= 0 r20= 9 r22=81
: scsi : aborting command due to timeout : pid 2, scsi0, channel 0, id
2, lun 0
0x00 00 00 00 00 00
: workingu=1 last_cmd=2 quhdu=1 quendu=1 r 0= 6 r 1=2c r 2=cf r 3= 0
r 4= 0
r 5= 0 r 6= 0 r 7= 0 r 8= 0 r 9= 0 r a= 0 r b= 0 r c= 0 r d= 0 r e=
0
r f= 0 r10=36 r11=20 r12= 0 r13= 1 r14= 0 r15= 2 r16=80 r1c=a3
r1f=80
in_snd= 0 r20= 9 r22=81
: SCSI host 0 abort (pid 2) timed out - resetting
: SCSI bus is being reset for host 0 channel 0.
: SCSI host 0 channel 0 reset (pid 2) timed out - trying harder
: SCSI bus is being reset for host 0 channel 0.
What I have done now is: I have replaced atp870u.c/atp870u.h in the
kernel-source ( 2.2.13/2.2.14pre) by the driver provided in
redhat60.zip, which can be
found on www.acard.com. This driver seems to work without problems under
2.2.13/2.2.14pre, but only resident in the kernel, not as module
(similar errors like above).
(Should I use this old driver with 2.2.13/2.2.14pre till the driver
provided by the kernel-source works for me (the old one was for 2.2.5)?)
Regards,
Wolfgang
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/