I have a couple servers experiencing some lockup problems. I get these
types of messages printed to the console. Can anyone offer some advise as
to what might be causing this? I ran memtest extensively on these servers
and did not find any memory errors. Here's the info. Thanks.
[gecker@ns1 gecker]$ uname -a
Linux ns1.reliablehosting.com 2.2.10 #1 Thu Nov 4 11:55:20 PST 1999 i686
unknown
scsi0 : BusLogic BT-930
Vendor: QUANTUM Model: FIREBALL SE6.4S Rev: PJ09
Type: Direct-Access ANSI SCSI revision: 02
And the errors.
scsi : aborting command due to timeout : pid 4062
29, scsi0, channel 0, id 0, lun 0 Write (6) 01 00 93 02 00
scsi0: Aborting CCB #406236 to Target 0
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
scsi0: Sending Bus Device Reset CCB #406320 to Target 0
scsi : aborting command due to timeout : pid 406230, scsi0, channel 0, id
0, lun
0 Write (6) 01 40 47 04 00
scsi0: Unable to Abort Command to Target 0 - CCB Reset
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/