serinfo:1.0 driver:4.27
0: uart:16450 port:3F8 irq:4 baud:1200 tx:0 rx:13676 RTS
1: uart:16450 port:2F8 irq:3 baud:57600 tx:122025 rx:359967 oe:231 CTS|DSR
2: uart:unknown port:3E8 irq:4
3: uart:unknown port:2E8 irq:3
ppp0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-25-00-00-00-00-00-00-00-00
inet addr:130.230.202.42 P-t-P:130.230.10.11 Mask:255.255.255.255
POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1
RX packets:1766 errors:158 dropped:0 overruns:0 frame:158
TX packets:1751 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:10
With 2.2.13 I don't get overrun errors:
serinfo:1.0 driver:4.27
0: uart:16450 port:3F8 irq:4 baud:1200 tx:0 rx:13991 RTS
1: uart:16450 port:2F8 irq:3 baud:57600 tx:334346 rx:442640 RTS|CTS|DTR|DSR|CD
2: uart:unknown port:3E8 irq:4
3: uart:unknown port:2E8 irq:3
gcc is 2.7.2.3 in both cases and .config is the same. hdparm is in use to
unmask irq. It's a 100 MHz 486 with IDE drive.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/