Re: 2.3.26: usb-mouse/uhci

toon@vdpas.hobby.nl
Sun, 7 Nov 1999 23:28:11 +0100

On Sun, Nov 07, 1999 at 01:40:14PM +0100, Joerg Stroettchen wrote:
> hello,
>
> switching from 2.3.25 to 2.3.26 introduced a somewhat strange behaviour
> of my usb-mouse: response to a mouse clicks requires a small movement of
> the mouse.
>
> /var log/messages tells me 1380 times per minute:
>
> kernel: Set toggle from c7d0080 rval 4* for status=25000003 to 1,exp=3,
> act=4

I'm running linux-2.3.26 here.
I have a M$ Intellimouse USB mouse.
It works great, apart from the wheel (but thats to be expected).
I don't see the problems you describe.

I use gpm.
My X server is connected to /dev/gpmdata.
Here is the relevant part from XF86Config:

Section "Pointer"
Device "/dev/gpmdata"
Protocol "MouseSystems"

I run gpm as follows:

gpm -3 -m /dev/usb/mouse0 -t imps2 -R msc

Regards,
Toon.

-- 
Toon van der Pas      Email: toon@vdpas.hobby.nl
Zomervlinderberm 24   Phone: +31 (30) 635 3162           -o)
3994 WP  Houten       Fax:   +31 (30) 634 1662           /\\
The Netherlands                                         _\_v


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/