The acard problem is partly solved. I've mailed with Kenneth Ljungh
<kenneth.ljungh@starport.se> that now gets his acard to work with the
new patch from Mr Alan Cox. But for my card, it doesn't work.
Kenneth Ljungh has an Acard AEC-6712S and I've an Acard AEC-6710S.
While loading it as module or during boottime it gives about the same
error
since 2.2.0preX. ("about the same"= I havn't compared the numbers, but
otherwise it is the same messages.)
I asked Kenneth to mail me his atp870u files, so I could be sure that
I didn't make something stupid.
As module it says:
-----------------------------------------------------------------------
kassandra:/lib/modules/2.2.13/scsi# insmod atp870u.o
aec671x_detect:
ACARD AEC-671X PCI Ultra/W SCSI-3 Host Adapter: 0 IO:fe80, IRQ:10.
ID: 6 MATSHITACD-R CW-7502 4.10
ID: 7 Host Adapter
scsi0 : ACARD AEC-6710/6712 PCI Ultra/W SCSI-3 Adapter Driver V1.0
scsi : 1 host.
scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6,
lun 0 Re
workingu=1 last_cmd=6 quhdu=2 quendu=2 r 0= 6 r 1=2c r 2=cf r 3= 3 r
4= 0 r 5 1
scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6,
lun 0 Re
workingu=1 last_cmd=6 quhdu=2 quendu=2 r 0= 6 r 1=2c r 2=cf r 3= 3 r
4= 0 r 5
1
SCSI host 0 abort (pid 6) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 6) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
------------------------------------------------------------------------
And there it stops.
I
hope this can help. I'm ofcourse willing to test whatever is needed.
Thank you, Mr Alan Cox very much for working on the Acard problem!
/Jonas
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/