from the README of PPP 2.3.10 I understand that you do the fine work
for the Linux version of pppd -- which I really love (but I guess I
don't have to tell you that because otherwise I would not be using
it).
I use PPP to dial into an NT server with call back. Unfortunately, now
I get the following when activating debug mode -- which I cannot
correctly interpret:
Serial connection established.
Using interface ppp0
Connect: ppp0 <--> /dev/modem
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MD5> <callback CBCP> <magic
0x2159a4a9> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x0 <asyncmap 0x0> <auth chap m$oft> <magic 0x22ef>
<pcomp> <accomp>]
sent [LCP ConfAck id=0x0 <asyncmap 0x0> <auth chap m$oft> <magic 0x22ef>
<pcomp> <accomp>]
rcvd [LCP ConfRej id=0x1 <auth chap MD5>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <callback CBCP> <magic 0x2159a4a9>
<pcomp> <accomp>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <callback CBCP> <magic 0x2159a4a9>
<pcomp> <accomp>]
cbcp_lowerup
want: 14
peer refused to authenticate: terminating link
sent [LCP TermReq id=0x3 "peer refused to authenticate"]
rcvd [CHAP Challenge id=0xc <0ff5f9d502a9a2c4>, name = ""]
rcvd [LCP TermAck id=0x3]
Connection terminated.
Terminating on signal 2.
Connect script failed
Could you give me a hint on what is going wrong and how I might fix
it?
Thanks,
Parto.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/