would someone please tell me if I have to worry about these
messages ?
Kernel is plain 2.3.18
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<3>PCI: Address space collision on region 6 of device ATI 210888GX
<3>PCI: Address space collision on region 0 of device Acer Labs M5229 TXpro
<3>PCI: Address space collision on region 2 of device Acer Labs M5229 TXpro
<3>PCI: Address space collision on region 3 of device Acer Labs M5229 TXpro
<3>PCI: Address space collision on region 4 of device Acer Labs M5229 TXpro
<3>PCI: Address space collision on region 0 of device Adaptec AIC-7872
<3>PCI: Address space collision on region 0 of device Adaptec AIC-7872 (#2)
Hardware is:
ASUS P5-AB Board
ALI Chipset (Aladdin V rev4)
PCI Adaptec 3940 Dual Channel SCSI Card
PCI ATI Mach64 (WinTurbo or something like that)
ISA 3Com 509b Ethernet Card
Output of /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Acer Labs M1541 Aladdin V (rev 4).
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xe6000000 [0xe6ffffff].
Bus 0, device 1, function 0:
PCI bridge: Acer Labs M5243 AGP (rev 4).
Master Capable. Latency=64.
Bus 0, device 3, function 0:
Bridge: Acer Labs M7101 PMU (rev 0).
Bus 0, device 7, function 0:
ISA bridge: Acer Labs M1533 Aladdin IV (rev 195).
Bus 0, device 9, function 0:
VGA compatible controller: ATI 210888GX (rev 1).
Non-prefetchable 32 bit memory at 0xe5000000 [0xe57fffff].
Bus 0, device 11, function 0:
PCI bridge: DEC DC21050 (rev 2).
Master Capable. Latency=32. Min Gnt=4.
Bus 0, device 15, function 0:
IDE interface: Acer Labs M5229 TXpro (rev 193).
Master Capable. No bursts. Min Gnt=2.Max Lat=4.
I/O at 0x1f0 [0xffff].
I/O at 0x3f4 [0xffff].
I/O at 0x170 [0xffff].
I/O at 0x374 [0xffff].
I/O at 0xb800 [0xb80f].
Bus 2, device 4, function 0:
SCSI storage controller: Adaptec AIC-7872 (rev 3).
IRQ 11.
Master Capable. Latency=32. Min Gnt=8.Max Lat=8.
I/O at 0xd800 [0xd8ff].
Non-prefetchable 32 bit memory at 0xe4800000 [0xe4800fff].
Bus 2, device 5, function 0:
SCSI storage controller: Adaptec AIC-7872 (#2) (rev 3).
IRQ 10.
Master Capable. Latency=32. Min Gnt=8.Max Lat=8.
I/O at 0xd400 [0xd4ff].
Non-prefetchable 32 bit memory at 0xe4000000 [0xe4000fff].
Sorry for that log dump.
cheers,
Patrick
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/