Alas, it does not. I get:
BusLogic: IRQ Channel 0 illegal for FlashPoint Host Adapter
at PCI Bus 0 Device 10 I/O Addres 0xE800
every time I boot, regardless of where the card is, the arrangement of the
other cards, and the bios settings: PNP OS enabled/disabled, order of irqs
assigned, USB settings, pretty much everything. I've been using version
one of this mobo with my amd300 for almost two years 24x7, and this board
is almost identical (version two, 2MB cache, amd475 cpu), so I know all the
jumpers are right (checked 'emagain anyway). Only other clue I have is
that earlier in the boot I get:
PCI: 00 3B [1106/3040/000604] has unknown header type 00, ignoring
I have a BusLogic FlashPoint LW BT-950R, FIC 2013v2 2MB mobo, AMD K6-2/475
cpu. The old mobo is FIC2013v1, 1MB cache, old cpu is AMD K6-2/300.
Is there anything else I can try? I've found where in the source the error
comes from - the pci_<something> call in BusLogic.c returns the correct
values for everything except IRQ. I'm at a loss.
jim
-- Urmane Hendrake "Anti-wrinkle cream there may be, but urmane@urmane.org anti-fat-bastard cream there is not." http://www.urmane.org/~urmane Dave, The Full Monty
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/