Re: 2.2.13pre15 aic78xx probs [disabling CONFIG_SCSI_MULTI_LUN doesn't help]

John Kennedy (jk@csuchico.edu)
Sat, 9 Oct 1999 06:20:22 -0700


--W/nzBZO5zC0uMSeA
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: quoted-printable

On Fri, Oct 08, 1999 at 11:39:04AM -0700, John Kennedy wrote:
> On Fri, Oct 08, 1999 at 09:26:02AM -0400, Doug Ledford wrote:
> > Turn off the PROBE ALL LUNS option in the SCSI config then promptly fil=
e a bug
> > report with the Yamaha CD-RW devision about the firmware in their devic=
es.
>=20
> Fair enough. (:
>=20
> Didn't change that between pre14 and pre15 though:
=2E..

Indeed. I recompiled without CONFIG_SCSI_MULTI_LUN and it didn't help.

[diff -u linux-2.2.13pre1[45]/.config]
--- linux-2.2.13pre14/.config Mon Sep 27 20:31:25 1999
+++ linux-2.2.13pre15/.config Sat Oct 9 05:37:35 1999
@@ -173,7 +173,7 @@
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
-CONFIG_SCSI_MULTI_LUN=3Dy
+# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=3Dy
# CONFIG_SCSI_LOGGING is not set
=20
@@ -207,6 +207,7 @@
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set

Michael Surenbrock also said that his multiple LUN support was disabled.

Under pre15, my kernel detects the Yamaha as a "scsi removable disk sdc"
and my SCSI bus-activity light goes on and stays lit.

I've included a pre14 boot for your viewing pleasure.
--- john
=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D=
-=3D
Oct 9 06:05:20 akasha syslogd 1.3-3: restart.
Oct 9 06:05:22 akasha kernel: klogd 1.3-3, log source =3D /proc/kmsg start=
ed.
Oct 9 06:05:22 akasha kernel: Inspecting /boot/System.map-2.2.13pre14
Oct 9 06:05:22 akasha init: Entering runlevel: 2
Oct 9 06:05:22 akasha kernel: Loaded 7855 symbols from /boot/System.map-2.=
2.13pre14.
Oct 9 06:05:22 akasha kernel: Symbols match kernel version 2.2.13.
Oct 9 06:05:22 akasha kernel: No module symbols loaded.
Oct 9 06:05:22 akasha kernel: Linux version 2.2.13pre14 (warlock@akasha) (=
gcc version egcs-2.91.60 19981201 (egcs-1.1.1 release)) #56 Mon Sep 27 20:3=
1:49 PDT 1999=20
=2E..
Oct 9 06:05:22 akasha kernel: (scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host=
adapter> found at PCI 6/0=20
Oct 9 06:05:22 akasha kernel: (scsi0) Wide Channel, SCSI ID=3D7, 32/255 SC=
Bs=20
Oct 9 06:05:22 akasha kernel: (scsi0) Downloading sequencer code... 374 in=
structions downloaded=20
Oct 9 06:05:22 akasha kernel: scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/=
PCI-Fast SCSI) 5.1.19/3.2.4=20
Oct 9 06:05:22 akasha kernel: <Adaptec AIC-7890/1 Ultra2 SCSI host =
adapter>=20
Oct 9 06:05:22 akasha kernel: scsi : 1 host.=20
Oct 9 06:05:22 akasha kernel: (scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec,=
offset 15.=20
Oct 9 06:05:22 akasha kernel: Vendor: SEAGATE Model: ST118273LW =
Rev: 5960=20
Oct 9 06:05:22 akasha kernel: Type: Direct-Access =
ANSI SCSI revision: 02=20
Oct 9 06:05:22 akasha kernel: Detected scsi disk sda at scsi0, channel 0, =
id 0, lun 0=20
Oct 9 06:05:22 akasha kernel: (scsi0:0:1:0) Synchronous at 40.0 Mbyte/sec,=
offset 15.=20
Oct 9 06:05:22 akasha kernel: Vendor: SEAGATE Model: ST19171W =
Rev: 0023=20
Oct 9 06:05:22 akasha kernel: Type: Direct-Access =
ANSI SCSI revision: 02=20
Oct 9 06:05:22 akasha kernel: Detected scsi disk sdb at scsi0, channel 0, =
id 1, lun 0=20
Oct 9 06:05:22 akasha kernel: (scsi0:0:5:0) Synchronous at 8.0 Mbyte/sec, =
offset 31.=20
Oct 9 06:05:22 akasha kernel: Vendor: YAMAHA Model: CRW4416S =
Rev: 1.0e=20
Oct 9 06:05:22 akasha kernel: Type: CD-ROM =
ANSI SCSI revision: 02=20
Oct 9 06:05:22 akasha kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0=
, id 5, lun 0=20
Oct 9 06:05:22 akasha kernel: scsi : detected 1 SCSI cdrom 2 SCSI disks to=
tal.=20
Oct 9 06:05:22 akasha kernel: sr0: scsi3-mmc drive: 16x/16x writer cd/rw x=
a/form2 cdda tray=20
Oct 9 06:05:22 akasha kernel: Uniform CDROM driver Revision: 2.56=20
Oct 9 06:05:22 akasha kernel: SCSI device sda: hdwr sector=3D 512 bytes. S=
ectors=3D 35566480 [17366 MB] [17.4 GB]=20
Oct 9 06:05:22 akasha kernel: SCSI device sdb: hdwr sector=3D 512 bytes. S=
ectors=3D 17783112 [8683 MB] [8.7 GB]=20
=2E..

--W/nzBZO5zC0uMSeA
Content-Type: application/pgp-signature

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 5.0i for non-commercial use
MessageID: LDHUa+oKJOyIWb2CMeIx2GiMAXvbUAY/

iQA/AwUBN/9BFG/ftxGdcmZ0EQLffwCfSnkJtFD5Hwl8VWABznCO3sp0JIsAn3No
PXH1d4qp/jIPDwowKtJh5JgH
=f1pj
-----END PGP SIGNATURE-----

--W/nzBZO5zC0uMSeA--

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/