Sergey> We just did buy HP Netserver with 1G Ram and RAID Card from
Sergey> SYMBIOS and can't get it worked with RedHat 6.0. Can't mount
Sergey> VFS .... Any suggestions and help very appreciate.
Which box did you get?
I have a relatively new Netserver which has two 53c896 controllers on
it. However there is a problem with the PCI bridges which makes all
motherboard mounted PCI devices show up twice in the PCI lists, Martin
Mares sent me a patch for this, but it's not in the Red Hat install
kernel.
To get the thing installed I plugged in an Adaptec 2940 and used that
during installation. I then compiled a new kernel where I hacked the
53c8xx driver to only look for two controllers (it goes boink when it
tries initing the same controller twice - in parallel) and now it runs
fine.
Jes
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/