I reported semi-random hangs of 2.2.x a while back, and have more
information now. Since then, I've upgraded to 2.2.12, and have
applied the ikd patch to get diagnostics. With IKD, The hangs now
result in an oops. I've replaced the motherboard (upgraded to FIC
VA503+), CPU (upgraded from P5-MMX-200 to AMD K6-2/400, tried a
different video card (S3 and S3V), removed all other cards, etc.
Memory checks out fine (via memtest86).
Also, what am I doing wrong that causes ksymoops to generate its
warnings? I can't get it not to.
My base system is SUSE 6.1, FYI.
It's always the X server that dies. I've *never* had a death without
X running. I've tried, too.
Here are a couple of the oops report. Please somebody help. I've
been battling this one for a LONG time, and just can't get the system
to be stable.
In all cases, all that was running was X and xscreensaver (v3.17).
If there's anything else about my system that would help diagnose this,
I'd gladly dig it up. I also have 'boot.msg', etc. if anybody wants to
see them, too. I'll attach a few of those types of things to the end,
too. I'll gladly dig up anything else that may help shed some light
on this.
Thank you *very* much
-Nick
--------------------------------------------------------------------------
cat oops.01
Oops: 0002
CPU: 0
EIP: 0010:[<c013e598>]
EFLAGS: 00010202
eax: 00000001 ebx: c5c00000 ecx: 0000000b edx: 00000030
esi: 00000020 edi: 00000005 ebp: c5c01efc esp: c5c01efc
ds: 0018 es: 0018 ss: 0018
Process X (pid: 321, process nr: 9, stackpage=c5c01000)
Stack: c5c01f08 c01783ba c5115060 c5c01f20 c014bdd6 c5115060 c0028d5c 00000000
00000000 c5c01f58 c0131f27 c5115060 00000000 0000009f c5bab430 c5bab460
00000145 00000005 c5c00000 7fffffff 00000001 00000000 c3891000 c5c01fbc
Call Trace: [<c01783ba>] [<c014bdd6>] [<c0131f27>] [<c01323ba>] [<c01089b1>]
Code: c6 05 00 00 00 00 00 8b 5d fc 89 ec 5d c3 89 f6 55 89 e5 53
Deadlock threshold exceeded, forcing Oops.
Unable to handle kernel NULL pointer dereference at virtual address 00000000
current->tss.cr3 = 007c3000, %cr3 = 007c3000
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<c013e598>]
EFLAGS: 00010246
eax: 00000001 ebx: c0bcc000 ecx: 00000005 edx: 00002000
esi: 00000000 edi: c402f008 ebp: c0bcdee4 esp: c0bcdee4
ds: 0018 es: 0018 ss: 0018
Process top (pid: 557, process nr: 44, stackpage=c0bcd000)
Stack: c0bcdf0c c0134877 c0bcdf44 00000000 c402f008 0000416d c0bcdf04 c01171e5
c0bcdf24 c012f2f4 c0bcdf20 c012f42f c5d615c0 c0bcdf44 c0bcdf44 c0bcdf50
c012f6a8 c5d615c0 c0bcdf44 0000000b c15e0720 ffffffe9 00000001 0000000b
Call Trace: [<c0134877>] [<c01171e5>] [<c012f2f4>] [<c012f42f>] [<c012f6a8>]
[<c012f842>] [<c01277ac>]
[<c01279f8>] [<c01089b1>]
Code: c6 05 00 00 00 00 00 8b 5d fc 89 ec 5d c3 89 f6 55 89 e5 53
---------------
ksymoops:
cat oops.01.trace
Options used: -V (default)
-o /lib/modules/2.2.12/ (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-m /usr/src/linux/System.map (default)
-c 1 (default)
You did not tell me where to find symbol information. I will assume
that the log matches the kernel and modules that are running right now
and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Oops: 0002
CPU: 0
EIP: 0010:[<c013e598>]
EFLAGS: 00010202
eax: 00000001 ebx: c5c00000 ecx: 0000000b edx: 00000030
esi: 00000020 edi: 00000005 ebp: c5c01efc esp: c5c01efc
ds: 0018 es: 0018 ss: 0018
Process X (pid: 321, process nr: 9, stackpage=c5c01000)
Stack: c5c01f08 c01783ba c5115060 c5c01f20 c014bdd6 c5115060 c0028d5c 00000000
00000000 c5c01f58 c0131f27 c5115060 00000000 0000009f c5bab430 c5bab460
00000145 00000005 c5c00000 7fffffff 00000001 00000000 c3891000 c5c01fbc
Call Trace: [<c01783ba>] [<c014bdd6>] [<c0131f27>] [<c01323ba>] [<c01089b1>]
Code: c6 05 00 00 00 00 00 8b 5d fc 89 ec 5d c3 89 f6 55 89 e5 53
>>EIP: c013e598 <mcount+a0/b0>
Trace: c01783ba <unix_poll+e/90>
Trace: c014bdd6 <sock_poll+2a/34>
Trace: c0131f27 <do_select+137/210>
Trace: c01323ba <sys_select+3ba/4e8>
Trace: c01089b1 <system_call+41/50>
Code: c013e598 <mcount+a0/b0> 00000000 <_EIP>: <===
Code: c013e598 <mcount+a0/b0> 0: c6 05 00 00 00 00
movb $0x0,0x0 <===
Code: c013e59e <mcount+a6/b0> 6: 00
Code: c013e59f <mcount+a7/b0> 7: 8b 5d fc
movl 0xfffffffc(%ebp),%ebx
Code: c013e5a2 <mcount+aa/b0> a: 89 ec
movl %ebp,%esp
Code: c013e5a4 <mcount+ac/b0> c: 5d
popl %ebp
Code: c013e5a5 <mcount+ad/b0> d: c3
ret
Code: c013e5a6 <mcount+ae/b0> e: 89 f6
movl %esi,%esi
Code: c013e5a8 <mcount_internal+0/84> 10: 55
pushl %ebp
Code: c013e5a9 <mcount_internal+1/84> 11: 89 e5
movl %esp,%ebp
Code: c013e5ab <mcount_internal+3/84> 13: 53
pushl %ebx
Deadlock threshold exceeded, forcing Oops.
Unable to handle kernel NULL pointer dereference at virtual address 00000000
current->tss.cr3 = 007c3000, %cr3 = 007c3000
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<c013e598>]
EFLAGS: 00010246
eax: 00000001 ebx: c0bcc000 ecx: 00000005 edx: 00002000
esi: 00000000 edi: c402f008 ebp: c0bcdee4 esp: c0bcdee4
ds: 0018 es: 0018 ss: 0018
Process top (pid: 557, process nr: 44, stackpage=c0bcd000)
Stack: c0bcdf0c c0134877 c0bcdf44 00000000 c402f008 0000416d c0bcdf04 c01171e5
c0bcdf24 c012f2f4 c0bcdf20 c012f42f c5d615c0 c0bcdf44 c0bcdf44 c0bcdf50
c012f6a8 c5d615c0 c0bcdf44 0000000b c15e0720 ffffffe9 00000001 0000000b
Call Trace: [<c0134877>] [<c01171e5>] [<c012f2f4>] [<c012f42f>] [<c012f6a8>]
[<c012f842>] [<c01277ac>]
[<c01279f8>] [<c01089b1>]
Code: c6 05 00 00 00 00 00 8b 5d fc 89 ec 5d c3 89 f6 55 89 e5 53
>>EIP: c013e598 <mcount+a0/b0>
Trace: c0134877 <d_lookup+13/e0>
Trace: c01171e5 <in_group_p+d/4c>
Trace: c012f2f4 <permission+b0/128>
Trace: c012f42f <cached_lookup+1b/60>
Trace: c012f6a8 <lookup_dentry+118/1e0>
Trace: c012f842 <open_namei+6e/36c>
Trace: c01277ac <filp_open+50/104>
Trace: c01279f8 <sys_open+40/a0>
Code: c013e598 <mcount+a0/b0> 00000000 <_EIP>: <===
Code: c013e598 <mcount+a0/b0> 0: c6 05 00 00 00 00
movb $0x0,0x0 <===
Code: c013e59e <mcount+a6/b0> 6: 00
Code: c013e59f <mcount+a7/b0> 7: 8b 5d fc
movl 0xfffffffc(%ebp),%ebx
Code: c013e5a2 <mcount+aa/b0> a: 89 ec
movl %ebp,%esp
Code: c013e5a4 <mcount+ac/b0> c: 5d
popl %ebp
Code: c013e5a5 <mcount+ad/b0> d: c3
ret
Code: c013e5a6 <mcount+ae/b0> e: 89 f6
movl %esi,%esi
Code: c013e5a8 <mcount_internal+0/84> 10: 55
pushl %ebp
Code: c013e5a9 <mcount_internal+1/84> 11: 89 e5
movl %esp,%ebp
Code: c013e5ab <mcount_internal+3/84> 13: 53
pushl %ebx
1 warning issued. Results may not be reliable.
---------------------------------------------------------------------------
Oops: 0002
CPU: 0
EIP: 0010:[<c013e598>]
EFLAGS: 00010206
eax: 00000001 ebx: c1a16000 ecx: 00000024 edx: 00000017
esi: 00000fbc edi: 00000001 ebp: c1a17e8c esp: c1a17e8c
ds: 0018 es: 0018 ss: 0018
Process X (pid: 941, process nr: 31, stackpage=c1a17000)
Stack: c1a17ea0 c01129d4 c38aa000 00000fbc 00000001 c1a17eb4 c017845f c17d0828
00000001 c375fa40 c1a17ec0 c014d966 c38aa000 c1a17ed4 c014e4a8 c375fa40
c375fa40 00000001 c1a17f10 c01781f1 c375fa40 00001000 c1a87f6c 00000040
Call Trace: [<c01129d4>] [<c017845f>] [<c014d966>] [<c014e4a8>] [<c01781f1>]
[<c014bb3d>] [<c014bc55>]
[<c0127f2c>] [<c01089b1>]
Code: c6 05 00 00 00 00 00 8b 5d fc 89 ec 5d c3 89 f6 55 89 e5 53
-----------
ksymoops:
# cat oops.05.trace
Options used: -V (default)
-o /lib/modules/2.2.12/ (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-m /usr/src/linux/System.map (default)
-c 1 (default)
You did not tell me where to find symbol information. I will assume
that the log matches the kernel and modules that are running right now
and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Oops: 0002
CPU: 0
EIP: 0010:[<c013e598>]
EFLAGS: 00010206
eax: 00000001 ebx: c1a16000 ecx: 00000024 edx: 00000017
esi: 00000fbc edi: 00000001 ebp: c1a17e8c esp: c1a17e8c
ds: 0018 es: 0018 ss: 0018
Process X (pid: 941, process nr: 31, stackpage=c1a17000)
Stack: c1a17ea0 c01129d4 c38aa000 00000fbc 00000001 c1a17eb4 c017845f c17d0828
00000001 c375fa40 c1a17ec0 c014d966 c38aa000 c1a17ed4 c014e4a8 c375fa40
c375fa40 00000001 c1a17f10 c01781f1 c375fa40 00001000 c1a87f6c 00000040
Call Trace: [<c01129d4>] [<c017845f>] [<c014d966>] [<c014e4a8>] [<c01781f1>]
[<c014bb3d>] [<c014bc55>]
[<c0127f2c>] [<c01089b1>]
Code: c6 05 00 00 00 00 00 8b 5d fc 89 ec 5d c3 89 f6 55 89 e5 53
>>EIP: c013e598 <mcount+a0/b0>
Trace: c01129d4 <__wake_up+10/58>
Trace: c017845f <unix_stream_write_space+23/4c>
Trace: c014d966 <sock_wfree+22/28>
Trace: c014e4a8 <__kfree_skb+40/b8>
Trace: c01781f1 <unix_stream_recvmsg+265/310>
Trace: c014bb3d <sock_recvmsg+41/b4>
Trace: c014bc55 <sock_read+89/94>
Trace: c0127f2c <sys_read+b8/d0>
Code: c013e598 <mcount+a0/b0> 00000000 <_EIP>: <===
Code: c013e598 <mcount+a0/b0> 0: c6 05 00 00 00 00
movb $0x0,0x0 <===
Code: c013e59e <mcount+a6/b0> 6: 00
Code: c013e59f <mcount+a7/b0> 7: 8b 5d fc
movl 0xfffffffc(%ebp),%ebx
Code: c013e5a2 <mcount+aa/b0> a: 89 ec
movl %ebp,%esp
Code: c013e5a4 <mcount+ac/b0> c: 5d
popl %ebp
Code: c013e5a5 <mcount+ad/b0> d: c3
ret
Code: c013e5a6 <mcount+ae/b0> e: 89 f6
movl %esi,%esi
Code: c013e5a8 <mcount_internal+0/84> 10: 55
pushl %ebp
Code: c013e5a9 <mcount_internal+1/84> 11: 89 e5
movl %esp,%ebp
Code: c013e5ab <mcount_internal+3/84> 13: 53
pushl %ebx
1 warning issued. Results may not be reliable.
---------------------------------------------------------------------------
Oops: 0002
CPU: 0
EIP: 0010:[<c013e598>]
EFLAGS: 00010206
eax: 00000001 ebx: c2792000 ecx: 0000001b edx: 00000020
esi: 00000002 edi: 00000001 ebp: c2793efc esp: c2793efc
ds: 0018 es: 0018 ss: 0018
Process X (pid: 1529, process nr: 40, stackpage=c2793000)
Stack: c2793f08 c01783ba c2c882a0 c2793f20 c014bdd6 c2c882a0 c03c42bc 00000000
00000000 c2793f58 c0131f27 c2c882a0 00000000 0000009f c5d84610 c5d84640
00000145 00000001 c2792000 7fffffff 00000000 00000000 c33f8000 c2793fbc
Call Trace: [<c01783ba>] [<c014bdd6>] [<c0131f27>] [<c01323ba>] [<c01089b1>]
Code: c6 05 00 00 00 00 00 8b 5d fc 89 ec 5d c3 89 f6 55 89 e5 53
------
ksymoops:
cat oops.07.trace
Options used: -V (default)
-o /lib/modules/2.2.12/ (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-m /usr/src/linux/System.map (default)
-c 1 (default)
You did not tell me where to find symbol information. I will assume
that the log matches the kernel and modules that are running right now
and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Oops: 0002
CPU: 0
EIP: 0010:[<c013e598>]
EFLAGS: 00010206
eax: 00000001 ebx: c2792000 ecx: 0000001b edx: 00000020
esi: 00000002 edi: 00000001 ebp: c2793efc esp: c2793efc
ds: 0018 es: 0018 ss: 0018
Process X (pid: 1529, process nr: 40, stackpage=c2793000)
Stack: c2793f08 c01783ba c2c882a0 c2793f20 c014bdd6 c2c882a0 c03c42bc 00000000
00000000 c2793f58 c0131f27 c2c882a0 00000000 0000009f c5d84610 c5d84640
00000145 00000001 c2792000 7fffffff 00000000 00000000 c33f8000 c2793fbc
Call Trace: [<c01783ba>] [<c014bdd6>] [<c0131f27>] [<c01323ba>] [<c01089b1>]
Code: c6 05 00 00 00 00 00 8b 5d fc 89 ec 5d c3 89 f6 55 89 e5 53
>>EIP: c013e598 <mcount+a0/b0>
Trace: c01783ba <unix_poll+e/90>
Trace: c014bdd6 <sock_poll+2a/34>
Trace: c0131f27 <do_select+137/210>
Trace: c01323ba <sys_select+3ba/4e8>
Trace: c01089b1 <system_call+41/50>
Code: c013e598 <mcount+a0/b0> 00000000 <_EIP>: <===
Code: c013e598 <mcount+a0/b0> 0: c6 05 00 00 00 00
movb $0x0,0x0 <===
Code: c013e59e <mcount+a6/b0> 6: 00
Code: c013e59f <mcount+a7/b0> 7: 8b 5d fc
movl 0xfffffffc(%ebp),%ebx
Code: c013e5a2 <mcount+aa/b0> a: 89 ec
movl %ebp,%esp
Code: c013e5a4 <mcount+ac/b0> c: 5d
popl %ebp
Code: c013e5a5 <mcount+ad/b0> d: c3
ret
Code: c013e5a6 <mcount+ae/b0> e: 89 f6
movl %esi,%esi
Code: c013e5a8 <mcount_internal+0/84> 10: 55
pushl %ebp
Code: c013e5a9 <mcount_internal+1/84> 11: 89 e5
movl %esp,%ebp
Code: c013e5ab <mcount_internal+3/84> 13: 53
pushl %ebx
1 warning issued. Results may not be reliable.
---------------------------------------------------------------------------
boot.msg:
gandalf:/zip/sysinfo% cat boot.msg
Inspecting /boot/System.map
Symbol table has incorrect version number.
Cannot find map file.
Loaded 168 symbols from 5 modules.
klogd 1.3-3, log source = /proc/kmsg started.
<4>Linux version 2.2.12 (root@gandalf) (gcc version egcs-2.91.66 19990314
(egcs-1.1.2 release)) #12 Mon Sep 13 23:58:23 CDT 1999
<4>Detected 400917000 Hz processor.
<4>Console: colour VGA+ 80x60
<4>Calibrating delay loop... 799.54 BogoMIPS
<4>Memory: 95816k/98240k available (808k kernel code, 416k reserved, 1200k
data, 0k init)
<5>VFS: Diskquotas version dquot_6.4.0 initialized
<4>CPU: AMD AMD-K6(tm) 3D processor stepping 0c
<6>Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mcount_init
<4>PCI: PCI BIOS revision 2.10 entry at 0xfb2e0
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<4>PCI: 00:38 [1106/0586]: Work around ISA DMA hangs (00)
<6>Activating ISA DMA hang workarounds.
<6>Linux NET4.0 for Linux 2.2
<6>Based upon Swansea University Computer Society NET3.039
<6>NET4: Unix domain sockets 1.0 for Linux NET4.0.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>Initializing RT netlink socket
<4>Starting kswapd v 1.5
<6>Detected PS/2 Mouse Port.
<6>Serial driver version 4.27 with no serial options enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<4>pty: 256 Unix98 ptys configured
<6>Real Time Clock Driver v1.09
<4>VP_IDE: IDE controller on PCI bus 00 dev 39
<4>VP_IDE: not 100% native mode: will probe irqs later
<4> ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA, hdb:DMA
<4> ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA, hdd:DMA
<4>hda: ST39140A, ATA DISK drive
<4>hdb: ST52520A, ATA DISK drive
<4>hdc: WDC AC36400L, ATA DISK drive
<4>hdd: FX810S, ATAPI CDROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hda: ST39140A, 8693MB w/448kB Cache, CHS=1108/255/63
<6>hdb: ST52520A, 2446MB w/112kB Cache, CHS=621/128/63
<6>hdc: WDC AC36400L, 6149MB w/256kB Cache, CHS=13328/15/63
<4>scsi : 0 hosts.
<4>scsi : detected total.
<4>Partition check:
<4> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
<4> hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 hdb7 hdb8 >
<4> hdc: [PTBL] [784/255/63] hdc1
<4>VFS: Mounted root (ext2 filesystem) readonly.
<4>Freeing unused kernel memory: 0k freed
<6>Adding Swap: 72256k swap-space (priority 0)
<5>scsi: ***** BusLogic SCSI Driver Version 2.1.15 of 17 August 1998 *****
<5>scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
<5>scsi0: Configuring BusLogic Model BT-946C PCI SCSI Host Adapter
<5>scsi0: Firmware Version: 4.25J, I/O Address: 0xE800, IRQ Channel: 11/Level
<5>scsi0: PCI Bus: 0, Device: 9, Address: Unassigned, Host Adapter SCSI ID: 7
<5>scsi0: Parity Checking: Enabled, Extended Translation: Enabled
<5>scsi0: Synchronous Negotiation: Fast, Wide Negotiation: Disabled
<5>scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
<5>scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
<5>scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 100
<5>scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
<5>scsi0: Error Recovery Strategy: Default, SCSI Bus Reset: Enabled
<5>scsi0: SCSI Bus Termination: Enabled
<5>scsi0: *** BusLogic BT-946C Initialized Successfully ***
<4>scsi0 : BusLogic BT-946C
<4>scsi : 1 host.
<4> Vendor: SEAGATE Model: ST31200N SUN1.05 Rev: 8564
<4> Type: Direct-Access ANSI SCSI revision: 02
<4> Vendor: IOMEGA Model: ZIP 100 Rev: E.08
<4> Type: Direct-Access ANSI SCSI revision: 02
<5>scsi0: Target 2: Queue Depth 28, Synchronous at 10.0 MB/sec, offset 15
<5>scsi0: Target 4: Queue Depth 3, Asynchronous
<4>Detected scsi disk sda at scsi0, channel 0, id 2, lun 0
<4>Detected scsi removable disk sdb at scsi0, channel 0, id 4, lun 0
<4>sda: Spinning up disk...............ready
<4>SCSI device sda: hdwr sector= 512 bytes. Sectors= 2061108 [1006 MB] [1.0 GB]
<4> sda: sda1 sda2
<4>SCSI device sdb: hdwr sector= 512 bytes. Sectors= 196608 [96 MB] [0.1 GB]
<4>sdb: Write Protect is off
<4> sdb: sdb1
Kernel logging (proc) stopped.
Kernel log daemon terminating.
-----------------------
/proc/modules:
ne2k-pci 4328 1 (autoclean)
8390 6180 0 (autoclean) [ne2k-pci]
dummy0 884 1 (autoclean)
nls_cp437 3664 2 (autoclean)
msdos 5260 2 (autoclean)
fat 30880 2 (autoclean) [msdos]
BusLogic 88036 3 (autoclean)
sd_mod 16764 3 (autoclean)
-----------------------
/proc/meminfo:
total: used: free: shared: buffers: cached:
Mem: 98115584 95240192 2875392 32526336 40636416 35811328
Swap: 142127104 688128 141438976
MemTotal: 95816 kB
MemFree: 2808 kB
MemShared: 31764 kB
Buffers: 39684 kB
Cached: 34972 kB
SwapTotal: 138796 kB
------------------------
/proc/devices:
Character devices:
1 mem
2 pty
3 ttyp
4 ttyS
5 cua
7 vcs
10 misc
36 netlink
128 ptm
136 pts
Block devices:
3 ide0
8 sd
22 ide1
-----------------------
/proc/cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 8
model name : AMD-K6(tm) 3D processor
stepping : 12
cpu MHz : 400.917000
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 sep mtrr pge mmx 3dnow
bogomips : 799.54
--
+-------------------------------+--------------------------------------------+
| /`--_ Nicholas R LeRoy | In a world without fences, Who needs Gates?|
|{ }/ Norland Corporation | ---- Experience Linux! ---- |
| \ * / W6340 Hackbarth Rd | http://www.linux.org | http://www.ssc.com |
| |___| Fort Atkinson, WI 53538 +--------------------------------------------+
| nick.leroy@norland.com | #include <disclaimer.h> |
|http://www3.norland.com/~nleroy| These are my own ideas, not my employer's. |
+----------------------------------------------------------------------------+
---End of forwarded mail from "Nicholas R LeRoy" <nick.leroy@norland.com>
--
+-------------------------------+--------------------------------------------+
| /`--_ Nicholas R LeRoy | In a world without fences, Who needs Gates?|
|{ }/ Norland Corporation | ---- Experience Linux! ---- |
| \ * / W6340 Hackbarth Rd | http://www.linux.org | http://www.ssc.com |
| |___| Fort Atkinson, WI 53538 +--------------------------------------------+
| nick.leroy@norland.com | #include <disclaimer.h> |
|http://www3.norland.com/~nleroy| These are my own ideas, not my employer's. |
+----------------------------------------------------------------------------+
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/