Sep 7 21:59:43 Spica kernel:
HPT366: onboard version of chipset, pin1=1 pin2=2
HPT366: IDE controller on PCI bus 00 dev 98
HPT366: not 100% native mode: will probe irqs later
HPT366: reg5ah=0x01 ATA-66 Cable Port0
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
hda: QUANTUM FIREBALLP KA13.6, ATA DISK drive
hdb: WDC AC310200R, ATA DISK drive
/dev/hda:
Timing buffer-cache reads: 128 MB in 1.95 seconds =65.64 MB/sec
Timing buffered disk reads: 64 MB in 3.28 seconds =19.51 MB/sec
/dev/hdb:
Timing buffer-cache reads: 128 MB in 1.92 seconds =66.67 MB/sec
Timing buffered disk reads: 64 MB in 4.91 seconds =13.03 MB/sec
HDA is a 7200 RPM drive
HDB is a 5400 RPM drive.
This is also a report card on the ABIT BP6 mainboard.
Andre Hedrick
The Linux IDE guy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/