Unfortunatelly, this time it was not text either... FWIW, here's
what I got after cating the mail to file and runing thru
'lynx -dump -force_html'
---------------------------------------------------------------
Dan Hollis wrote:
On Sat, 21 Aug 1999, Dieter [iso-8859-1] Nützel wrote:
> I get tuesday an Athlon 500 with MSI mainboard! :-)
> Anybody working on Athlon detection? May I offer any help?
I would be interested to see benchmarks of it. Can you run the
benchmark
at my page? It only takes a minute.
[1]ht tp://www.anime.net/~goemon/benchmarks.html
Hello Dan.
The Athlon 500 MHz (only, form now, sneeef ;-) is a really GREAT
performer.
I had tree days delay in getting my Athlon. It is now up since
Saturday morning 7.30 am.
Wow, what a night and very few sleep.
My 'normal' medical 3D visualization programs run twice as fast as
with my K6-III 400. But floating point intensive applications runs
three (yes 3 :-) times faster as with the K6-III 400.
--->
To Alan:
I have to put 'append = "mem=256M"' in my '/etc/lilo.conf' file.
Without it I only get 64 MB of system memory. Get some 'Unable to
handle kernel paging request at virtual address xxxxxxxx' faults.
Later more...
My kernel and all the other stuff was compiled on my 'old' K6-III 400.
Should I recompile the binutils, compiler, glibc-2.1.1,
glibc-2.1.2pre3 and the like with my Athlon? I got some compiler
'sigfaults' during my first attempts.
<---
Here are my results!!! :-)
SunWave1>cat /proc/version
Linux version 2.2.12 (root@SunWave1) (gcc version pgcc-2.91.66
19990314 (egcs-1.1.2 release)) #1 Fri Aug 27 06:29:36 MET DST 1999
SunWave1>cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 1
model name : AMD-K7(tm) Processor
stepping : 2
cpu MHz : 499.052640
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp & nbsp; : yes
flags : fpu vme de pse tsc msr 6 mce cx8 sep mtrr pge 14
cmov fcmov 22 mmx 30 3dnow
bogomips : 498.07
SunWave1>cat /proc/meminfo
total: used: free: shared: buffers: cached:
Mem: 264257536 163622912 100634624 103366656 7045120 61227008
Swap: 133885952 0 133885952
MemTotal: 258064 kB
MemFree: 98276 kB
MemShared: 100944 kB
Buffers: 6880 kB
Cached: 59792 kB
SwapTotal: 130748 kB
SwapFree: 130748 kB
SunWave1>cat /proc/mtrr
reg00: base=0x00000000 ( 0MB), size= 256MB: write-back, count=1
reg01: base=0xdc000000 (3520MB), size= 16MB: write-combining, count=1
SunWave1>lspci -vv
00:00.0 Host bridge: Advanced Micro Devices: Unknown device 7006 (rev
23)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32 set
Region 0: Memory at c0000000 (32-bit, prefetchable)
Region 1: Memory at e0100000 (32-bit, prefetchable)
Region 2: I/O ports at e000 [disabled]
Capabilities: <available only to root>
00:01.0 PCI bridge: Advanced Micro Devices: Unknown device 7007 (rev
01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 set
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000d000-0000 dfff
Memory behind bridge: d8000000-d bffffff
Prefetchable memory behind bridge: dc000000-ddffffff
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Advanced Micro Devices: Unknown device 7408 (rev
01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 set
00:07.1 IDE interface: Advanced Micro Devices: Unknown device 7409
(rev 03) (prog-if 8a)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 set
Region 4: I/O ports at f000
00:08.0 Ethernet controller: Intel Corporation 82557 (rev 04)
Subsystem: Unknown device 8086:0009
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 8 min, 56 max, 32 set, cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e0103000 (32-bit, prefetchable)
Region 1: I/O ports at e400
Region 2: Memory at e0000000 (32-bit, non-prefetchable)
Capabilities: <available only to root>
00:09.0 SCSI storage controller: Adaptec AIC-7881U (rev 01)
Subsystem: Unknown device 9004:7881
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 8 min, 8 max, 32 set, cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e800
Region 1: Memory at e0102000 (32-bit, non-prefetchable)
Capabilities: <available only to root>
01:05.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo3 (rev
01)
Subsystem: Unknown device 121a:003a
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d8000000 (32-bit, non-prefetchable)
Region 1: Memory at dc000000 (32-bit, prefetchable)
Region 2: I/O ports at d000
Capabilities: <available only to root>
**********************************************************************
****** **********
pgcc-1.1.3
-O
# # # # # # # &n bsp; ##### ###### # #
#### &nbs p; # #
# # ## # # &nbs p; # # # &n bsp; # # ##
# # &nb sp; # # #
# # # # # # &nb sp; ## ##### ; ##### # # #
# ######
# # # # # # &nb sp; ## # &nb sp; # # # #
# # &n bsp; # #
# # # ## # &nbs p; # # # &n bsp; # # #
## # &nb sp; # # #
#### # # # # # ##### ###### # #
#### &nbs p; # #
Dhrystone 2 without register variables 1 2 3 4 5 6
==============================================================
BYTE UNIX Benchmarks (Version 3.11)
System -- Linux SunWave1 2.2.12 #1 Fri Aug 27 06:29:36 MET DST 1999
i686 unknown
Start Benchmark Run: Sat Aug 28 07:41:42 MET DST 1999
2 interactive users.
Dhrystone 2 without register variables 1042737.3 lps ; (10 secs, 6
samples)
&nbs p; INDEX VALUES
TEST ; & nbsp; BASELINE
RESULT INDEX
Dhrystone 2 without register variables 22366.3 1042737.3
46.6
&nb sp; &nbs p; ;
=========
SUM of 1 items & nbsp; &n
bsp; &nb sp; 46.6
AVERAGE & nbsp; &n bsp; &nb
sp; &nbs p; 46.6
**********************************************************************
****** **********
pgcc-1.1.3
-O6 -mk6 -march=k6 -malign-double -mstack-align-double
# # # # # # # &n bsp; ##### ###### # #
#### &nbs p; # #
# # ## # # &nbs p; # # # &n bsp; # # ##
# # &nb sp; # # #
# # # # # # &nb sp; ## ##### ; ##### # # #
# ######
# # # # # # &nb sp; ## # &nb sp; # # # #
# # &n bsp; # #
# # # ## # &nbs p; # # # &n bsp; # # #
## # &nb sp; # # #
#### # # # # # ##### ###### # #
#### &nbs p; # #
Dhrystone 2 without register variables 1 2 3 4 5 6
==============================================================
BYTE UNIX Benchmarks (Version 3.11)
System -- Linux SunWave1 2.2.12 #1 Fri Aug 27 06:29:36 MET DST 1999
i686 unknown
Start Benchmark Run: Sat Aug 28 07:47:02 MET DST 1999
2 interactive users.
Dhrystone 2 without register variables 1146628.2 lps ; (10 secs, 6
samples)
&nbs p; INDEX VALUES
TEST ; & nbsp; BASELINE
RESULT INDEX
Dhrystone 2 without register variables 22366.3 1146628.2
51.3
&nb sp; &nbs p; ;
=========
SUM of 1 items & nbsp; &n
bsp; &nb sp; 51.3
AVERAGE & nbsp; &n bsp; &nb
sp; &nbs p; 51.3
If you need some more stuff, feel free to ask me about it. I have some
Mesa-3.1 beta2 (CVS) benchmarks, too.
Some little problems still exists: (for example with unix bench)
Process Creation Test 1 2 3sleep: error in loading shared libraries:
/lib/libcrypt.so.1: symbol __deregister_frame_info, version GLIBC_2.0
not defined in file libc.so.6 with link time reference
4 5 6
Execl Throughput Test 1 2 3 4 5 6
Filesystem Throughput Test (10 second test) 1 2 3 4 5
Regards,
Dieter
---
Dieter Nützel
Graduate Student, Computer Science
University of Hamburg
Department of Computer Science
Cognitive Systems Group
Vogt-Kölln-Straße 30
D-22527 Hamburg, Germany
email: Dieter Nützel <nuetzel@kogs.informatik.uni-hamburg.de>
@home: Dieter Nützel <dieter.nuetzel@arcormail.de>
- To unsubscribe from this list: send the line "unsubscribe
linux-kernel" in the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
References
1. http://www.anime.net/~goemon/benchmarks.html
---------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/