Re: PATCH: was Re: 2.3.13 pci_namedevice compile error

Joerg Pommnitz (pommnitz@darmstadt.gmd.de)
Thu, 12 Aug 1999 21:54:23 +0200

Alan Cox wrote:
> Try adding this patch on top of the other one (I dont have an NCR controller
> to try this so you can try it 8))
>

Works fine for me:

jpo ~>cat /proc/version
Linux version 2.3.13 (root@ploesser-isdn.darmstadt.gmd.de) (gcc version
2.95 19990728/Linux (release)) #2 Thu Aug 12 21:43:59 CEST 1999
jpo ~>cat /proc/scsi/ncr53c8xx/0
General information:
Chip NCR53C810, device id 0x1, revision id 0x2
IO port address 0x6100, IRQ number 11
Synchronous period factor 25, max commands per lun 32
jpo ~>cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: QUANTUM Model: MAVERICK 540S Rev: 0901
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 06 Lun: 00
Vendor: IOMEGA Model: ZIP 100 Rev: D.13
Type: Direct-Access ANSI SCSI revision: 02

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/