Re: bttv & 2.2.11 => can't switch channels

Marcel Lanz (marcel.lanz@ds9.ch)
Thu, 12 Aug 1999 00:44:37 +0200

Alan Cox wrote:
>
> > Since I use 2.2.11 I can't switch between channels on my Haupauge
> > TV-Card.
> > I have only one channel.
> >
> > Any ideas?
>
> What errors are coming back when you attempt to tune the card. Do you have
> the tuner loaded, what does it report at start up
Ugh. no errors.

At bootup my kernel said:

Aug 12 00:34:36 defiant kernel: Linux video capture interface: v1.00
Aug 12 00:34:36 defiant kernel: bttv0: Brooktree Bt878 (rev 2) bus: 0,
devfn: 88, irq: 15, memory: 0xe2000000.
Aug 12 00:34:36 defiant kernel: bttv: 1 Bt8xx card(s) found.
Aug 12 00:34:36 defiant kernel: bttv0: Hauppauge eeprom: tuner=Philips
FI1216 MK2 (5)
Aug 12 00:34:36 defiant kernel: bttv0: fader chip: TEA6300
Aug 12 00:34:36 defiant kernel: bttv0: model: BT878(Hauppauge new)
...
Aug 12 00:34:57 defiant kernel: bttv0: PLL: 28636363 => 35468950 ... ok

I use xawtv-2.38 and bttv-support is compiled into the kernel.
If I tune the card. No errors occured.
The channel-identifier from xawtv changes, but the picture is the same.

marcel

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/