I have been experiencing oopses in the block handling from about
2.2.0-pre4 on up. Also spontaneous reboots and complete lockups.
2.2.0-pre3 and lower do not exhibit this behaviour. One almost sure
fire way to cause this is to have large transfers going on. The system
is hand rolled, libc5, p200 smp, buslogic scsi, etc. .config and dmesg
output included at tail of message.
-----
grouchy:/usr/src/linux/scripts/ksymoops# ./ksymoops < oops.txt
Options used: -V (default)
-o /lib/modules/2.2.6-ac1/ (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-m /usr/src/linux/System.map (default)
-c 1 (default)
-a - same as ksymoops (default)
You did not tell me where to find symbol information. I will assume
that the log matches the kernel and modules that are running right now
and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
No modules in ksyms, skipping objects
Unable to handle kernel paging request at virtual address efecacd3
current->tss.cr3 = 02fe2000, %cr3 = 02fe2000
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c0143432>]
EFLAGS: 00010202
eax: efecacd3 ebx: 00000008 ecx: efecacd3 edx: c280c240
esi: 00000000 edi: 0000121e ebp: c2b3f650 esp: c2c01e6c
ds: 0018 es: 0018 ss: 0018
Process cdparanoia (pid: 187, process nr: 37, stackpage=c2c01000)
Stack: 0000121e c2b3f650 00000002 efecacd3 c014378b c2b3f650 c280c240 00000011
00000001 00000400 0000121e c2c01f14 c2b3f650 0000000d 00000001 0000121e
c2c01f14 00000400 0000121e c3793c00 c2b3f650 0000121e 00010000 00000010
Call Trace: [<c014378b>] [<c0141b4a>] [<c0141960>] [<c0112020>] [<c0196858>] [<c0192735>] [<c010e40a>]
[<c0126cd5>] [<c0107b04>]
Code: 8b 19 85 db 74 40 8b 4c 24 2c 51 53 8b 44 24 28 0f b7 40 0c
Copying default arch from ksymoops, bfd_arch=8 bfd_mach=0
>>EIP; c0143432 <block_getblk+8a/28c>
Trace; c014378b <ext2_getblk+157/22c>
Trace; c0141b4a <ext2_file_write+1ea/4b0>
Trace; c0141960 <ext2_file_write+0/4b0>
Trace; c0112020 <second_overflow+158/214>
Trace; c0196858 <write_chan+138/228>
Trace; c0192735 <tty_write+165/1d8>
Trace; c010e40a <smp_local_timer_interrupt+c2/134>
Trace; c0126cd5 <sys_write+d9/118>
Trace; c0107b04 <system_call+34/40>
Code; c0143432 <block_getblk+8a/28c> 00000000 <_EIP>:
Code; c0143432 <block_getblk+8a/28c> 0: 8b 19 movl (%ecx),%ebx
Code; c0143434 <block_getblk+8c/28c> 2: 85 db testl %ebx,%ebx
Code; c0143436 <block_getblk+8e/28c> 4: 74 40 je 46 <_EIP+0x46> c0143478 <block_getblk+d0/28c>
Code; c0143438 <block_getblk+90/28c> 6: 8b 4c 24 2c movl 0x2c(%esp,1),%ecx
Code; c014343c <block_getblk+94/28c> a: 51 pushl %ecx
Code; c014343d <block_getblk+95/28c> b: 53 pushl %ebx
Code; c014343e <block_getblk+96/28c> c: 8b 44 24 28 movl 0x28(%esp,1),%eax
Code; c0143442 <block_getblk+9a/28c> 10: 0f b7 40 0c movzwl 0xc(%eax),%eax
1 warning issued. Results may not be reliable.
----
#
# Automatically generated make config: don't edit
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
CONFIG_M586=y
# CONFIG_M586TSC is not set
# CONFIG_M686 is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
CONFIG_SMP=y
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_KMOD is not set
#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_QUIRKS=y
CONFIG_PCI_OPTIMIZE=y
CONFIG_PCI_OLD_PROC=y
# CONFIG_MCA is not set
# CONFIG_VISWS is not set
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_NET is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# CONFIG_BINFMT_JAVA is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_OTHER is not set
# CONFIG_APM is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_PARPORT is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_IDE is not set
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_ONLY is not set
#
# Additional Block Devices
#
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE_PARPORT=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_HD is not set
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_NETLINK=y
# CONFIG_RTNETLINK is not set
CONFIG_NETLINK_DEV=y
CONFIG_FIREWALL=y
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_IP_FIREWALL=y
# CONFIG_IP_FIREWALL_NETLINK is not set
CONFIG_IP_ALWAYS_DEFRAG=y
# CONFIG_IP_TRANSPARENT_PROXY is not set
CONFIG_IP_MASQUERADE=y
#
# Protocol-specific masquerading support will be built as modules.
#
CONFIG_IP_MASQUERADE_ICMP=y
#
# Protocol-specific masquerading support will be built as modules.
#
CONFIG_IP_MASQUERADE_MOD=y
# CONFIG_IP_MASQUERADE_IPAUTOFW is not set
CONFIG_IP_MASQUERADE_IPPORTFW=m
# CONFIG_IP_MASQUERADE_MFW is not set
CONFIG_IP_ROUTER=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_ALIAS=y
CONFIG_SYN_COOKIES=y
#
# (it is safe to leave these untouched)
#
# CONFIG_INET_RARP is not set
# CONFIG_SKB_LARGE is not set
# CONFIG_IPV6 is not set
#
#
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_BRIDGE is not set
# CONFIG_LLC is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
# CONFIG_CPU_IS_SLOW is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# SCSI support
#
CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_OMIT_FLASHPOINT=y
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_DEBUG is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
CONFIG_VORTEX=y
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_RTL8139 is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_EISA is not set
# CONFIG_NET_POCKET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_RADIO is not set
#
# Token ring devices
#
# CONFIG_TR is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_HOSTESS_SV11 is not set
# CONFIG_COSA is not set
# CONFIG_SEALEVEL_4021 is not set
# CONFIG_DLCI is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA subsystem support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
CONFIG_SERIAL_EXTENDED=y
# CONFIG_SERIAL_MANY_PORTS is not set
CONFIG_SERIAL_SHARE_IRQ=y
# CONFIG_SERIAL_DETECT_IRQ is not set
# CONFIG_SERIAL_MULTIPORT is not set
# CONFIG_HUB6 is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_UNIX98_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_PRINTER_READBACK is not set
# CONFIG_MOUSE is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
#
# Video For Linux
#
# CONFIG_VIDEO_DEV is not set
#
# Joystick support
#
# CONFIG_JOYSTICK is not set
# CONFIG_DTLK is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
#
# Filesystems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_MINIX_FS=y
# CONFIG_NTFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SUNRPC is not set
# CONFIG_LOCKD is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
#
# Partition Types
#
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_SMD_DISKLABEL is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VIDEO_SELECT is not set
# CONFIG_MDA_CONSOLE is not set
# CONFIG_FB is not set
#
# Sound
#
CONFIG_SOUND=y
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_OSS=y
# CONFIG_SOUND_DMAP is not set
# CONFIG_SOUND_PAS is not set
CONFIG_SOUND_SB=y
CONFIG_SB_BASE=220
CONFIG_SB_IRQ=5
CONFIG_SB_DMA=1
CONFIG_SB_DMA2=5
CONFIG_SB_MPU_BASE=330
#
# MPU401 IRQ is only required with Jazz16, SM Wave and ESS1688.
#
#
# Enter -1 to the following question if you have something else such as SB16/32.
#
CONFIG_SB_MPU_IRQ=5
# CONFIG_SOUND_PCISB is not set
# CONFIG_SOUND_ESSMAESTRO is not set
CONFIG_SOUND_ADLIB=y
# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_WAVEFRONT is not set
# CONFIG_SOUND_CS4232 is not set
# CONFIG_SOUND_OPL3SA2 is not set
# CONFIG_SOUND_MAUI is not set
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_AD1816 is not set
# CONFIG_SOUND_OPL3SA1 is not set
# CONFIG_SOUND_SOFTOSS is not set
CONFIG_SOUND_YM3812=y
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_WAVEARTIST is not set
#
# Additional low level sound drivers
#
# CONFIG_LOWLEVEL_SOUND is not set
#
# Kernel hacking
#
# CONFIG_MAGIC_SYSRQ is not set
-----
grouchy:/usr/src/linux/Documentation# dmesg
t/Reconnect: YYYYYYN#, Tagged Queuing: YYYYYYN#
scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 100
scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi0: Error Recovery Strategy: Default, SCSI Bus Reset: Enabled
scsi0: SCSI Bus Termination: Enabled
scsi0: *** BusLogic BT-946C Initialized Successfully ***
scsi0 : BusLogic BT-946C
scsi : 1 host.
Vendor: IBM Model: DCAS-34330 Rev: S65A
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: MICROP Model: 3243-19 1128RQ Rev: 28RQ
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
Vendor: ARCHIVE Model: Python 28849-XXX Rev: 4.CM
Type: Sequential-Access ANSI SCSI revision: 02
Detected scsi tape st0 at scsi0, channel 0, id 2, lun 0
Vendor: ARCHIVE Model: Python 28849-XXX Rev: 4.CM
Type: Medium Changer ANSI SCSI revision: 02
Detected scsi generic sgd at scsi0, channel 0, id 2, lun 1
Vendor: MATSHITA Model: CD-ROM CR-508 Rev: XS03
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
Vendor: YAMAHA Model: CRW4416S Rev: 1.0e
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 5, lun 0
scsi0: Target 0: Queue Depth 28, Synchronous at 10.0 MB/sec, offset 15
scsi0: Target 1: Queue Depth 28, Synchronous at 10.0 MB/sec, offset 15
scsi0: Target 2: Queue Depth 3, Synchronous at 5.00 MB/sec, offset 15
scsi0: Target 3: Queue Depth 3, Synchronous at 10.0 MB/sec, offset 15
scsi0: Target 5: Queue Depth 3, Synchronous at 8.33 MB/sec, offset 15
scsi : detected 1 SCSI tape 2 SCSI cdroms 2 SCSI disks total.
Uniform CDROM driver Revision: 2.54
sr1: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8467200 [4134 MB] [4.1 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8388315 [4095 MB] [4.1 GB]
3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com 3c595 Vortex 100baseTx at 0xe000, 00:a0:24:7c:34:51, IRQ 19
64K word-wide RAM 3:1 Rx:Tx split, autoselect/10baseT interface.
eth0: Overriding PCI latency timer (CFLT) setting of 0, new value is 248.
eth1: 3Com 3c590 Vortex 10Mbps at 0xd800, 00:20:af:f6:51:e0, IRQ 18
32K byte-wide RAM 1:1 Rx:Tx split, 10baseT interface.
eth1: Overriding PCI latency timer (CFLT) setting of 0, new value is 248.
Partition check:
sda: sda1 sda2 sda3 sda4
sdb: sdb1 sdb2 sdb3
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 52k freed
scsi0: Tagged Queuing now active for Target 0
Adding Swap: 104416k swap-space (priority -1)
scsi0: Tagged Queuing now active for Target 1
VFS: Disk change detected on device sr(11,0)
Unable to handle kernel paging request at virtual address efecacd3
current->tss.cr3 = 02fe2000, %cr3 = 02fe2000
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c0143432>]
EFLAGS: 00010202
eax: efecacd3 ebx: 00000008 ecx: efecacd3 edx: c280c240
esi: 00000000 edi: 0000121e ebp: c2b3f650 esp: c2c01e6c
ds: 0018 es: 0018 ss: 0018
Process cdparanoia (pid: 187, process nr: 37, stackpage=c2c01000)
Stack: 0000121e c2b3f650 00000002 efecacd3 c014378b c2b3f650 c280c240 00000011
00000001 00000400 0000121e c2c01f14 c2b3f650 0000000d 00000001 0000121e
c2c01f14 00000400 0000121e c3793c00 c2b3f650 0000121e 00010000 00000010
Call Trace: [<c014378b>] [<c0141b4a>] [<c0141960>] [<c0112020>] [<c0196858>] [<c0192735>] [<c010e40a>]
[<c0126cd5>] [<c0107b04>]
Code: 8b 19 85 db 74 40 8b 4c 24 2c 51 53 8b 44 24 28 0f b7 40 0c
grouchy:/usr/src/linux/Documentation#
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/