>I'm experiencing small problems with APM (kernel is 2.2.5) on two
>different machines:
>
>(1) On my Thoshiba laptop suspend/resume works fine (as long as
> I have the card manager eject the PCMCIA ethernet card on suspend).
> However, after resuming sound stops to work. The logs contain:
>
>Apr 10 11:39:16 click kernel: eth0: 3Com 3c589, port 0x300, irq 3, Auto port, hw
>_addr 00:60:97:CD:3B:9C
>Apr 10 11:39:17 click kernel: eth0: switched to 10base2 port
>Apr 10 11:56:45 click kernel: apm: busy: Parameter out of range
>Apr 10 11:56:50 click kernel: apm: busy: Parameter out of range
>Apr 10 14:09:47 click kernel: eth0: 3Com 3c589, port 0x300, irq 3, Auto port, hw
>_addr 00:60:97:CD:3B:9C
>Apr 10 14:09:47 click kernel: eth0: switched to 10base2 port
>Apr 10 14:11:17 click kernel: Sound: DMA (output) timed out - IRQ/DRQ config err
>or?
I have the same problem on my Toshiba, the only solution so far has been to
unload all the sound modules and reload them on resume. I would suspect the
sound driver is not APM aware and does not initialize the hardware properly
upon resume.
-- Jens-Uwe Mager <pgp-mailto:62CFDB25>- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/