I have provided some information on my system, please fell free to ask for more
if you need so.
Thx in advance for the help you will bring.
M
MY HARDWARE:
-----------
Mother board: Asus P2L97 440LX AGP
Pentium II 233MHz, overcloked at 300MHz
128 Mo of RAM
SCSI: Adaptec 2940UW PCI, Bios updated to 1.34.3 (I already had the problem
before)
Hard Disk: Quantum UW 2.2Go and 4.5Go
CD-Rom: Plextor 32x
CD-Writer: Yamaha CDR400
Jaz 1Go external
SOFTWARE:
--------
RedHat French 5.2 with kernel 2.0.36-0.7
I tried with kernel 2.0.36-3: no change
I tried with only the 2 HD and the CD-Rom (with a physical terminator on the
cd-rom): no change
I even tried with only the 2 HD: no change
--- BOOTING MESSAGES:Memory: sized by int13 0e801h Console: 16 point font, 400 scans Console: colour VGA+ 80x25, 1 virtual console (max 63) pcibios_init : BIOS32 Service Directory structure at 0x000f9a20 pcibios_init : BIOS32 Service Directory entry at 0xf04e0 pcibios_init : PCI BIOS revision 2.10 entry at 0xf0510 Probing PCI hardware. Calibrating delay loop.. ok - 299.01 BogoMIPS Memory: 127568k/131072k available (748k kernel code, 384k reserved, 2164k data) Swansea University Computer Society NET3.035 for Linux 2.0 NET3: Unix domain sockets 0.13 for Linux NET3.035. Swansea University Computer Society TCP/IP for NET3.034 IP Protocols: IGMP, ICMP, UDP, TCP Linux IP multicast router 0.07. VFS: Diskquotas version dquot_5.6.0 initialized Checking 386/387 coupling... Ok, fpu using exception 16 error reporting. Checking 'hlt' instruction... Ok. Linux version 2.0.36 (root@porky.redhat.com) (gcc version 2.7.2.3) #1 Tue Oct 13 22:17:11 EDT 1998 Starting kswapd v 1.4.2.2 Serial driver version 4.13 with no serial options enabled tty00 at 0x03f8 (irq = 4) is a 16550A tty01 at 0x02f8 (irq = 3) is a 16550A PS/2 auxiliary pointing device detected -- driver installed. Real Time Clock Driver v1.09 Ramdisk driver initialized : 16 ramdisks of 4096K size ide: i82371 PIIX (Triton) on PCI bus 0 function 33 ide0: BM-DMA at 0xc800-0xc807 ide1: BM-DMA at 0xc808-0xc80f Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8 scsi : 0 hosts. scsi : detected total. Partition check: RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). (scsi0) <Adaptec AHA-294X Ultra SCSI host adapter> found at PCI 11/0 (scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs (scsi0) Warning - detected auto-termination (scsi0) Please verify driver detected settings are correct. (scsi0) If not, then please properly set the device termination (scsi0) in the Adaptec SCSI BIOS by hitting CTRL-A when prompted (scsi0) during machine bootup. (scsi0) Cables present (Int-50 NO, Int-68 YES, Ext-68 YES) (scsi0) Downloading sequencer code... 419 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.2/3.2.4 <Adaptec AHA-294X Ultra SCSI host adapter> scsi : 1 host. Vendor: QUANTUM Model: XP32275W Rev: LXY4 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: QUANTUM Model: XP34550W Rev: LXY4 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0 Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0 Vendor: YAMAHA Model: CDR400t Rev: 1.0j Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 0 Vendor: iomega Model: jaz 1GB Rev: J^77 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi removable disk sdc at scsi0, channel 0, id 4, lun 0 (scsi0:0:0:0) Synchronous at 40.0 Mbyte/sec, offset 8. SCSI device sda: hdwr sector= 512 bytes. Sectors= 4445380 [2170 MB] [2.2 GB] sda: sda1 sda2 < sda5 sda6 > (scsi0:0:1:0) Synchronous at 40.0 Mbyte/sec, offset 8. SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8890760 [4341 MB] [4.3 GB] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > (scsi0:0:4:0) Synchronous at 10.0 Mbyte/sec, offset 15. SCSI device sdc: hdwr sector= 512 bytes. Sectors= 2091050 [1021 MB] [1.0 GB] sdc: Write Protect is off sdc: sdc4 VFS: Mounted root (ext2 filesystem) readonly. Trying to unmount old root ... okay Adding Swap: 32092k swap-space (priority -1) sysctl: ip forwarding off Swansea University Computer Society IPX 0.34 for NET3.035 IPX Portions Copyright (c) 1995 Caldera, Inc. Appletalk 0.17 for Linux NET3.035 scsi : aborting command due to timeout : pid 3249, scsi0, channel 0, id 4, lun 0 Write (6) 00 00 21 01 00 scsi : aborting command due to timeout : pid 3250, scsi0, channel 0, id 4, lun 0 Write (6) 00 01 21 01 00 scsi : aborting command due to timeout : pid 3251, scsi0, channel 0, id 4, lun 0 Write (6) 00 02 21 01 00 scsi : aborting command due to timeout : pid 3246, scsi0, channel 0, id 1, lun 0 Write (10) 00 00 67 b3 c2 00 00 02 00 scsi : aborting command due to timeout : pid 3247, scsi0, channel 0, id 1, lun 0 Write (10) 00 00 69 b3 b6 00 00 02 00 scsi : aborting command due to timeout : pid 3248, scsi0, channel 0, id 1, lun 0 Write (10) 00 00 6a b3 b4 00 00 04 00 SCSI host 0 abort (pid 3246) timed out - resetting SCSI bus is being reset for host 0 channel 0. (scsi0:0:1:0) Synchronous at 40.0 Mbyte/sec, offset 8. (scsi0:0:4:0) Synchronous at 10.0 Mbyte/sec, offset 15.
----
PCI devices found: Bus 0, device 11, function 0: SCSI storage controller: Adaptec AIC-7881U (rev 1). Medium devsel. Fast back-to-back capable. IRQ 11. Master Capable. Latency=32. Min Gnt=8.Max Lat=8. I/O at 0xc000. Non-prefetchable 32 bit memory at 0xdd800000. Bus 0, device 4, function 3: Bridge: Intel 82371AB PIIX4 ACPI (rev 1). Medium devsel. Fast back-to-back capable. Bus 0, device 4, function 2: USB Controller: Intel 82371AB PIIX4 USB (rev 1). Medium devsel. Fast back-to-back capable. IRQ 10. Master Capable. Latency=32. I/O at 0xc400. Bus 0, device 4, function 1: IDE interface: Intel 82371AB PIIX4 IDE (rev 1). Medium devsel. Fast back-to-back capable. Master Capable. Latency=32. I/O at 0xc800. Bus 0, device 4, function 0: ISA bridge: Intel 82371AB PIIX4 ISA (rev 1). Medium devsel. Fast back-to-back capable. Master Capable. No bursts. Bus 1, device 0, function 0: VGA compatible controller: ATI Mach64 GB (rev 92). Medium devsel. Fast back-to-back capable. IRQ 127. Master Capable. Latency=64. Min Gnt=8. Prefetchable 32 bit memory at 0xdf000000. I/O at 0xd800. Non-prefetchable 32 bit memory at 0xde000000. Bus 0, device 1, function 0: PCI bridge: Intel 440LX - 82443LX PAC AGP (rev 3). Medium devsel. Fast back-to-back capable. Master Capable. Latency=64. Min Gnt=9. Bus 0, device 0, function 0: Host bridge: Intel 440LX - 82443LX PAC Host (rev 3). Medium devsel. Fast back-to-back capable. Master Capable. Latency=64. Prefetchable 32 bit memory at 0xe0000000.
----
Adaptec AIC7xxx driver version: 5.1.2/3.2.4 Compile Options: AIC7XXX_RESET_DELAY : 15 AIC7XXX_TAGGED_QUEUEING: Adapter Support Enabled Check below to see which devices use tagged queueing AIC7XXX_PAGE_ENABLE : Enabled (This is no longer an option) AIC7XXX_PROC_STATS : Disabled
Adapter Configuration: SCSI Adapter: Adaptec AHA-294X Ultra SCSI host adapter Ultra Wide Controller PCI MMAPed I/O Base: 0xdd800000 Adapter SEEPROM Config: SEEPROM found and used. Adaptec SCSI BIOS: Enabled IRQ: 11 SCBs: Active 0, Max Active 2, Allocated 15, HW 16, Page 255 Interrupts: 3731 BIOS Control Word: 0x18a6 Adapter Control Word: 0x0053 Extended Translation: Enabled Disconnect Enable Flags: 0xffff Ultra Enable Flags: 0x0003 Tag Queue Enable Flags: 0x0000 Ordered Queue Tag Flags: 0x0000 Default Tag Queue Depth: 8 Tagged Queue By Device array for aic7xxx host instance 0: {255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255} Actual queue depth per device for aic7xxx host instance 0: {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
Statistics: (scsi0:0:0:0) Device using Wide/Sync transfers at 40.0 MByte/sec, offset 8 Device Negotiation Settings Period Offset Bus Width User 012 008 1 Goal 012 008 1 Current 012 008 1 Total transfers 103 (103 read;0 written) blks(512) rd=109; blks(512) wr=0
(scsi0:0:1:0) Device using Wide/Sync transfers at 40.0 MByte/sec, offset 8 Device Negotiation Settings Period Offset Bus Width User 012 008 1 Goal 012 008 1 Current 012 008 1 Total transfers 2815 (2005 read;810 written) blks(512) rd=19071; blks(512) wr=2066
(scsi0:0:4:0) Device using Narrow/Sync transfers at 10.0 MByte/sec, offset 15 Device Negotiation Settings Period Offset Bus Width User 012 008 1 Goal 012 015 0 Current 025 015 0 Total transfers 675 (628 read;47 written) blks(512) rd=630; blks(512) wr=805
----
To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe aic7xxx" in the body of the message
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/