after ony 2 days uptime, my server fell over with SCSI timeout.
I had to reset it. Unfortunately the messages didn't make it into the log.
The error was probably on one of these devices:
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: HP Model: C2490A-300 Rev: 4140
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: IBM Model: DORS-32160 Rev: WA6A
Type: Direct-Access ANSI SCSI revision: 02
I think we had a similar problem in pre37-4 when the Symbios
SCSI code was updated, but I don't remember exactly.
My config:
CONFIG_EXPERIMENTAL=y
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KERNELD=y
CONFIG_MEM_STD=y
CONFIG_MAX_MEMSIZE=1024
CONFIG_NET=y
CONFIG_PCI=y
CONFIG_PCI_OPTIMIZE=y
CONFIG_SYSVIPC=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_JAVA=m
CONFIG_KERNEL_ELF=y
CONFIG_M486=y
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_STRIPED=m
CONFIG_MD_MIRRORING=m
CONFIG_MD_RAID5=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_FIREWALL=y
CONFIG_NET_ALIAS=y
CONFIG_INET=y
CONFIG_IP_FORWARD=y
CONFIG_SYN_COOKIES=y
CONFIG_IP_FIREWALL=y
CONFIG_IP_FIREWALL_VERBOSE=y
CONFIG_IP_MASQUERADE=y
CONFIG_IP_MASQUERADE_IPSEC=y
CONFIG_IP_MASQUERADE_IPSEC_EXPIRE=30
CONFIG_IP_MASQUERADE_ICMP=y
CONFIG_IP_ACCT=y
CONFIG_NET_IPIP=m
CONFIG_IP_ALIAS=m
CONFIG_INET_RARP=m
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y
CONFIG_IPX=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_NCR53C8XX=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=10
CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT=y
CONFIG_SCSI_PPA=m
CONFIG_SCSI_PPA_HAVE_PEDANTIC=y
CONFIG_NETDEVICES=y
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_NET_PCI=y
CONFIG_VIA_RHINE=m
CONFIG_NET_ISA=y
CONFIG_NE2000=m
CONFIG_ISDN=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_DRV_LOOP=m
CONFIG_ISDN_DRV_HISAX=m
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_16_3=y
CONFIG_CD_NO_IDESCSI=y
CONFIG_MCD=m
CONFIG_MCDX=m
CONFIG_QUOTA=y
CONFIG_MINIX_FS=y
CONFIG_EXT2_FS=y
CONFIG_NLS=m
CONFIG_ISO9660_FS=m
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_UMSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_15=m
CONFIG_PROC_FS=y
CONFIG_NFS_FS=y
CONFIG_SMB_FS=m
CONFIG_NCP_FS=m
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_MOUNT_SUBDIR=y
CONFIG_AUTOFS_FS=m
CONFIG_UFS_FS=m
CONFIG_BSD_DISKLABEL=y
CONFIG_SMD_DISKLABEL=y
CONFIG_SERIAL=y
CONFIG_STALDRV=y
CONFIG_PRINTER=m
CONFIG_MOUSE=y
CONFIG_PSMOUSE=m
CONFIG_FTAPE=m
CONFIG_WATCHDOG=y
CONFIG_SOFT_WATCHDOG=m
CONFIG_RTC=y
CONFIG_SOUND=m
NCR driver info:
Chip NCR53C810, device id 0x1, revision id 0x2
IO port address 0xe800, IRQ number 15
Using memory mapped IO at virtual address 0x4805000
Synchronous period factor 25, max commands per lun 32
Complete device list:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: TOSHIBA Model: CD-ROM XM-3601TA Rev: 0265
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: HP Model: C2490A-300 Rev: 4140
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: IBM Model: DORS-32160 Rev: WA6A
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: FUJITSU Model: M1603S-512 Rev: 6C01
Type: Direct-Access ANSI SCSI revision: 02
I also suspect memory leaks but this is hard to test. It needs a lot
of time to show up, and if the SCSI subsystem crashes before that,
there's no way in finding it...
hjb
-- "Every use of Linux is a proper use of Linux." -- John "Maddog" Hall- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/