> > emulation. The problem for us turned out to be that the IDE emulation
> > reported the flash as being removable when it was not.
>
> The card it does it to me on is definitely removable, its PCMCIA
Ours is the flash/IDE used in our Firebox-II (and later) model firewalls.
I think it is manufactured by Smart Modular Technologies. Here is it's
ident info:
Model=, FwRev=Ver.7.0, SerialNo=
Config={ HardSect NotMFM Removeable DTR>10Mbs nonMagnetic }
RawCHS=250/4/16, TrkSize=8448, SectSize=528, ECCbytes=4
BuffType=1(1Sect), BuffSize=0kB, MaxMultSect=1, MultSect=off
DblWordIO=no, maxPIO=2(fast), DMA=no
CurCHS=250/4/16, CurSects=16000, LBA=yes, LBAsects=16000
IORDY=yes
Note that it claims it is removeable, and lacks a Model and Serial No. It
is not removable though; it's soldered to the mainboard. :)
-bp
-- B. James Phillippe . bryan@terran.org Software Engineer, WGT Inc. . http://www.terran.org/~bryan
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/