Re: matrox-fb
Petr Vandrovec Ing. VTEI (VANDROVE@vc.cvut.cz)
Mon, 8 Mar 1999 20:12:19 MET-1
On 8 Mar 99 at 19:42, Riccardo Facchetti wrote:
> lspci -v show me that VGA cards are in IRQs 9 and 12.
> The MSS (compatible, the aedsp16) use the IRQ 10 so there should not be
> IRQ conflicts.
Yes, it looks OK.
[snip]
> I use a resolution of 1280x1024 (19" monitor) and I have just switched
> VT2 to 800x600 and back and it worked fine (of course with some
> misalignment with monitor but that's expected.
That's strange. You should switch into XF86_SVGA :-( I tried XF86_FBDev
couple of times without problems. There are XF86_FBDev boot messages:
----
(**) FBDev: Using XF86Config video mode database
(--) FBDev: Frame buffer device: MATROX
(--) FBDev: Video memory: 4096K @ 0xe8000000
(--) FBDev: MMIO regs: 16K @# 0xe4000000
(--) FBDev: Type 0 type_aux 0 bits_per_pixel 8
(--) FBDev: Hardware accelerator: Matrox MGA1064SG (Mystique)
(--) FBDev: No driver support for hardware acceleration
(--) FBDev: Using cfb8 driver
----
> > send me output of lspci -vxxx + isapnptools config + soundcard settings
> > + boot options + output from fbset ?
> Okay. You can find attached all the info you asked for.
Thanks, but unfortunately for you, I do not see any problem :-(
Best regards,
Petr Vandrovec
vandrove@vc.cvut.cz
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/