/dev/modem, UART: 16550A, Port: 0x03f8, IRQ: 4, Flags: spd_vhi
Thats all perfectly correct, manually setting them makes no difference.
Later,
Tom
Quoting John Alvord <jalvo@cloud9.net>:
> Maybe you are using autodetection in setserial. That tends to work
> poorly sometimes. If it fails to detect the type of UART correctly,
> you would see those symptoms. Try setting the UART type, IRQ, port
> address, etc and see if that changes the symptoms.
>
> john alvord
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/