> in page.h and vmlinux.lds) and get a panic. Everything seems fine until it
> probes partition tables on the AMI controller (there are no other disks).
> The first disk seems OK (and should be the boot disk). The second and third
> virtual disk claim that they don't have a partiton table.
> The kernel then panics because it can't mount the root partition.
> The first disk is a single disk. The second and third virtual disks are
> RAID-0, two and three physical disks respectivley. The controller is a 428,
> Rev-D1, with battery backup, bios 1.47.
> Unfortunately, I don't have another disk to boot from to isolate driver
> problems from kernel problems. If I use a stock 2.2.1 kernel with "mem=950M",
> then things seem to work fine.
> Any ideas on what could be going wrong?
> Thanks,
> -Dan Christian
> Jeffrey Jones wrote:
>> I realized that it is silly of me to post these in the form of patches,
>> (since the patches are longer than the two source files combined). So here
>> are the source files, just copy them over linux/drivers/scsi/megaraid.c and
>> linux/drivers/scsi/megaraid.h,
>> they will work for 2.0,2.1, and 2.2 kernels.
>> Also I forgot to mention there is a Redhat boot.img and supp.img that has
>> the driver (older version) on it so you can install to a RAID drive as the
>> boot device... at ftp://ftp.megatrends.com/megaraid/drivers/linux
>>
>> Jeff L Jones <jeffreyj@ami.com>
>> RAID SW Dev., American Megatrends Inc.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/