> This was driving me nuts (ok, ok - short putt) until I saw some
> remark about using sndconfig. I had tried different combinations of
> esstype=????, irq=??, and dma=?? and had not gotten anything to work.
> When I ran sndconfig, it modified my /etc/conf.modules file with the
> following sb line:
>
> options sb io=0x220 irq=5 dma=0 dma16=5 mpu_io=0x300
Ya mean: options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=x330 ->
NOT?
Sob, <lazy> sob! mpu_io=0x300? arrrggghh! means my pnp ne NIC
has to be changed to support another workable I/O! Hmmmm...
just curious what brought the change from 2.0.* -> 2.1.* ->
2.2.*
for the mpu_io= change??? And also curious if NOT selecting pnp
since the NIC is a disabled pnp NIC...never mind, shouldn't
matter :-P
Hmmmm, me readum more Manuals & docs! ;-)
> That worked!
I'm gonna try to change the mpu_io= to 0x{not conflict with NIC}
> Obviously, I have the sound system compiled as a module... :-)
At least I did _that_ ! :-)
Jeff
--- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/