2. Use of the Iomega Parallel Port zip drives crashed constantly whenever
reading files from the zip disk. If the errors continue, the zip drive is
no longer detected, and a reboot will be necessary to use it again.
Errors are similiar to:
SCSI disk error : host 0 channel 0 id 6 lun 0 return code = 27010000
scsidisk I/O error: dev 08:04, sector 21604
This error does not seem to affect writing to the zip disk, and is not
related to bad sectors. This error was first noticed with 2.2.0pre9, and
was blamed on not compiling CONFIG_SCSI_IZIP_EPP16 and
CONFIG_SCSI_IZIP_SLOW_CTR into the kernel. With 2.2.0, these were
compiled in statically, and still no change.
3. Parallel port, zip drive
4. Linux version 2.2.0 (root@shiva) (gcc version 2.7.2.2) #3 Wed Jan 27
00:29:25 GMT 1999
5. No Oops Information
6. This can be triggered, easily, by copying any file of large
size(approximately 5-10 megs, if not large).
7.1
7.2. /proc/cpuinfo
processor : 0
vendor_id : unknown
cpu family : 4
model : 0
model name : unknown
stepping : unknown
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
fpu : yes
fpu_exception : yes
cpuid level : -1
wp : yes
flags :
bogomips : 49.77
processor : 0
vendor_id : unknown
cpu family : 4
model : 0
model name : unknown
stepping : unknown
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
fpu : yes
fpu_exception : yes
cpuid level : -1
wp : yes
flags :
bogomips : 49.77
7.3. /proc/modules
pnp 45544 0
opl3 13172 0
sb 31672 0
uart401 6672 0 [sb]
midi 26944 0 [pnp opl3 sb uart401]
soundbase 478272 0 [pnp opl3 sb uart401 midi]
sndshield 3076 0 [pnp opl3 sb uart401 midi soundbase]
7.4. /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: IOMEGA Model: ZIP 100 Rev: D.17
Type: Direct-Access ANSI SCSI revision: 02
7.5. /proc/parport/hardware
base: 0x278
irq: none
dma: none
modes: SPP,ECP,ECPEPP,ECPPS2
/proc/scsi/ppa/0
Version : 2.03 (for Linux 2.0.0)
Parport : parport0
Mode : EPP 16 bit
Other information:
I have also heard of other reports of this happening, and one
other user who, after upgrading from 2.0.36, is unable to use his printer.
------------------------------------------------
~ Christopher P. Cericola, shiva@cyberenet.net ~
~ http://www.geocities.com/paris/2845 ~
~ ~
~ ShivaSoft, http://shiva.netpedia.net ~
~ "Producing the best Open Source Software ~
~ that 486's can compile..." ~
------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/