Its a good suspect. Take it back out and see if the problem goes away. If it
does then check the configuration you are using for memory is valid, check
it is seated firmly etc
> Partition check:
> hda: hda1 hda2 <hda2: bad access: block=0, count=2
> end_request: I/O error, dev 02:02, sector 0 > hda3
That could be a disk block error.
> 19:47:41 kladden kernel: CPU: 0
> 19:47:41 kladden kernel: EIP: 0010:[sys_mount+508/816]
> 19:47:41 kladden kernel: EFLAGS: 00010206
>
> I was told to do a "ksymoops /boot/System.map < /var/log/messages",
(you dont need to - your syslog did if for you (hence sys_mount+...)
Alan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/