Re: 2.1.93 won't boot

Alan Cox (alan@lxorguk.ukuu.org.uk)
Tue, 7 Apr 1998 10:45:09 +0100 (BST)

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Trevor Johnson: "2.1.93 won't compile"
Previous message: Paul Gortmaker: "Re: ramdisk and initrd in 2.1.9x"

>
> On Mon, 6 Apr 1998 23:34:51 -0700 (PDT), you wrote:
>
> >
> >Ok, I must have done something really stupid ... but what?
> >
> >i486 system, same config as I used with .92. Kernel made just fine. Got
> >to where is said OK, booting kernel and it resets the machine.
>
> Exactly the same situation here. 92 fine, 93 reboots instantly after the
> 'booting kernel' message appears.
>
> The same kernel on my 2xPPro-200 SMP box boots ok, except my PCI NE2000 clone is
> not found.
>
> /proc/pci is (from 2.1.92 on dying PC)
>
> >PCI devices found:
> > Bus 0, device 11, function 0:
> > VGA compatible controller: Alliance AT3D (rev 2).
> > Slow devsel.
> > Non-prefetchable 32 bit memory at 0xef000000 [0xef000000].
> > I/O at 0xdfa0 [0xdfa1].
> > Bus 0, device 10, function 0:
> > Ethernet controller: Realtek 8029 (rev 0).
> > Medium devsel. IRQ b.
> > I/O at 0xdf40 [0xdf41].
> > Bus 0, device 9, function 0:
> > SCSI storage controller: Adaptec AIC-7861 (rev 1).
> > Medium devsel. Fast back-to-back capable. IRQ a. Master Capable. Latency=32. Min Gnt=4.Max Lat=4.
> > I/O at 0xdc00 [0xdc01].
> > Non-prefetchable 32 bit memory at 0xeefef000 [0xeefef000].
> > Bus 0, device 7, function 1:
> > IDE interface: Intel 82371SB PIIX3 IDE (rev 0).
> > Medium devsel. Fast back-to-back capable. Master Capable. Latency=32.
> > I/O at 0xffa0 [0xffa1].
> > Bus 0, device 7, function 0:
> > ISA bridge: Intel 82371SB PIIX3 ISA (rev 1).
> > Medium devsel. Fast back-to-back capable. Master Capable. No bursts.
> > Bus 0, device 0, function 0:
> > Host bridge: Intel 82441FX Natoma (rev 2).
> > Medium devsel. Fast back-to-back capable. Master Capable. Latency=32.
>
>
> Config is
>
> >#
> ># Automatically generated by make menuconfig: don't edit
> >#
> >
> >#
> ># Code maturity level options
> >#
> ># CONFIG_EXPERIMENTAL is not set
> >
> >#
> ># Processor type and features
> >#
> ># CONFIG_M386 is not set
> ># CONFIG_M486 is not set
> >CONFIG_M586=y
> ># CONFIG_M686 is not set
> ># CONFIG_MATH_EMULATION is not set
> >CONFIG_MAX_MEMSIZE=1024
> >
> >#
> ># Loadable module support
> >#
> >CONFIG_MODULES=y
> >CONFIG_MODVERSIONS=y
> ># CONFIG_KMOD is not set
> >
> >#
> ># General setup
> >#
> >CONFIG_NET=y
> >CONFIG_PCI=y
> >CONFIG_PCI_BIOS=y
> >CONFIG_PCI_DIRECT=y
> >CONFIG_PCI_OLD_PROC=y
> ># CONFIG_MCA is not set
> >CONFIG_SYSVIPC=y
> ># CONFIG_BSD_PROCESS_ACCT is not set
> >CONFIG_SYSCTL=y
> >CONFIG_BINFMT_AOUT=y
> >CONFIG_BINFMT_ELF=y
> >CONFIG_BINFMT_MISC=y
> ># CONFIG_VIDEO_SELECT is not set
> >CONFIG_PARPORT=y
> >CONFIG_PARPORT_PC=y
> ># CONFIG_PARPORT_OTHER is not set
> >
> >#
> ># Plug and Play support
> >#
> ># CONFIG_PNP is not set
> >
> >#
> ># Floppy, IDE, and other block devices
> >#
> >CONFIG_BLK_DEV_FD=y
> >CONFIG_BLK_DEV_IDE=y
> ># CONFIG_BLK_DEV_HD_IDE is not set
> >CONFIG_BLK_DEV_IDEDISK=y
> >CONFIG_BLK_DEV_IDECD=y
> ># CONFIG_BLK_DEV_IDETAPE is not set
> ># CONFIG_BLK_DEV_IDEFLOPPY is not set
> ># CONFIG_BLK_DEV_IDESCSI is not set
> >CONFIG_BLK_DEV_CMD640=y
> ># CONFIG_BLK_DEV_CMD640_ENHANCED is not set
> >CONFIG_BLK_DEV_RZ1000=y
> >CONFIG_BLK_DEV_IDEPCI=y
> >CONFIG_BLK_DEV_IDEDMA=y
> ># CONFIG_IDE_CHIPSETS is not set
> ># CONFIG_BLK_DEV_LOOP is not set
> ># CONFIG_BLK_DEV_MD is not set
> ># CONFIG_BLK_DEV_RAM is not set
> ># CONFIG_BLK_DEV_XD is not set
> >CONFIG_PARIDE_PARPORT=y
> ># CONFIG_PARIDE is not set
> ># CONFIG_BLK_DEV_HD is not set
> >
> >#
> ># Networking options
> >#
> >CONFIG_PACKET=y
> >CONFIG_NETLINK=y
> >CONFIG_RTNETLINK=y
> ># CONFIG_NETLINK_DEV is not set
> >CONFIG_FIREWALL=y
> >CONFIG_NET_ALIAS=y
> >CONFIG_FILTER=y
> >CONFIG_UNIX=y
> >CONFIG_INET=y
> ># CONFIG_IP_MULTICAST is not set
> ># CONFIG_IP_ADVANCED_ROUTER is not set
> ># CONFIG_IP_PNP is not set
> >CONFIG_IP_FIREWALL=y
> ># CONFIG_IP_FIREWALL_NETLINK is not set
> ># CONFIG_IP_FIREWALL_VERBOSE is not set
> >CONFIG_IP_TRANSPARENT_PROXY=y
> >CONFIG_IP_ALWAYS_DEFRAG=y
> ># CONFIG_IP_ACCT is not set
> >CONFIG_IP_MASQUERADE=y
> >CONFIG_IP_MASQUERADE_ICMP=y
> ># CONFIG_IP_ROUTER is not set
> >CONFIG_NET_IPIP=y
> >CONFIG_NET_IPGRE=y
> >CONFIG_IP_ALIAS=y
> ># CONFIG_SYN_COOKIES is not set
> ># CONFIG_INET_RARP is not set
> >CONFIG_IP_NOSR=y
> >CONFIG_SKB_LARGE=y
> ># CONFIG_IPX is not set
> ># CONFIG_ATALK is not set
> >
> >#
> ># SCSI support
> >#
> >CONFIG_SCSI=y
> >CONFIG_BLK_DEV_SD=y
> >CONFIG_CHR_DEV_ST=y
> >CONFIG_BLK_DEV_SR=y
> ># CONFIG_BLK_DEV_SR_VENDOR is not set
> ># CONFIG_CHR_DEV_SG is not set
> >CONFIG_SCSI_MULTI_LUN=y
> >CONFIG_SCSI_CONSTANTS=y
> ># CONFIG_SCSI_LOGGING is not set
> >
> >#
> ># SCSI low-level drivers
> >#
> ># CONFIG_SCSI_7000FASST is not set
> ># CONFIG_SCSI_AHA152X is not set
> >CONFIG_SCSI_AHA1542=y
> ># CONFIG_SCSI_AHA1740 is not set
> >CONFIG_SCSI_AIC7XXX=y
> ># CONFIG_AIC7XXX_TAGGED_QUEUEING is not set
> ># CONFIG_OVERRIDE_CMDS is not set
> ># CONFIG_AIC7XXX_PAGE_ENABLE is not set
> ># CONFIG_AIC7XXX_PROC_STATS is not set
> >CONFIG_AIC7XXX_RESET_DELAY=15
> ># CONFIG_SCSI_ADVANSYS is not set
> ># CONFIG_SCSI_IN2000 is not set
> ># CONFIG_SCSI_AM53C974 is not set
> ># CONFIG_SCSI_BUSLOGIC is not set
> ># CONFIG_SCSI_DTC3280 is not set
> ># CONFIG_SCSI_EATA_DMA is not set
> ># CONFIG_SCSI_EATA_PIO is not set
> ># CONFIG_SCSI_EATA is not set
> ># CONFIG_SCSI_FUTURE_DOMAIN is not set
> ># CONFIG_SCSI_GDTH is not set
> ># CONFIG_SCSI_GENERIC_NCR5380 is not set
> ># CONFIG_SCSI_NCR53C406A is not set
> ># CONFIG_SCSI_NCR53C7xx is not set
> >CONFIG_SCSI_NCR53C8XX=y
> ># CONFIG_SCSI_NCR53C8XX_NVRAM_DETECT is not set
> ># CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE is not set
> ># CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
> >CONFIG_SCSI_NCR53C8XX_MAX_TAGS=4
> >CONFIG_SCSI_NCR53C8XX_SYNC=5
> ># CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT is not set
> ># CONFIG_SCSI_PPA is not set
> ># CONFIG_SCSI_PAS16 is not set
> ># CONFIG_SCSI_PCI2000 is not set
> ># CONFIG_SCSI_PCI2220I is not set
> ># CONFIG_SCSI_PSI240I is not set
> ># CONFIG_SCSI_QLOGIC_FAS is not set
> ># CONFIG_SCSI_QLOGIC_ISP is not set
> ># CONFIG_SCSI_SEAGATE is not set
> ># CONFIG_SCSI_DC390T is not set
> ># CONFIG_SCSI_T128 is not set
> ># CONFIG_SCSI_U14_34F is not set
> >CONFIG_SCSI_ULTRASTOR=y
> >
> >#
> ># Network device support
> >#
> >CONFIG_NETDEVICES=y
> ># CONFIG_ARCNET is not set
> >CONFIG_DUMMY=m
> ># CONFIG_EQUALIZER is not set
> >CONFIG_NET_ETHERNET=y
> >CONFIG_NET_VENDOR_3COM=y
> ># CONFIG_EL1 is not set
> ># CONFIG_EL2 is not set
> >CONFIG_EL3=y
> ># CONFIG_VORTEX is not set
> ># CONFIG_LANCE is not set
> >CONFIG_NET_VENDOR_SMC=y
> >CONFIG_WD80x3=y
> ># CONFIG_ULTRA is not set
> ># CONFIG_ULTRA32 is not set
> ># CONFIG_SMC9194 is not set
> ># CONFIG_NET_VENDOR_RACAL is not set
> >CONFIG_NET_ISA=y
> ># CONFIG_E2100 is not set
> ># CONFIG_DEPCA is not set
> ># CONFIG_EWRK3 is not set
> ># CONFIG_EEXPRESS is not set
> ># CONFIG_HPLAN_PLUS is not set
> ># CONFIG_HPLAN is not set
> ># CONFIG_HP100 is not set
> >CONFIG_NE2000=y
> ># CONFIG_SK_G16 is not set
> >CONFIG_NET_EISA=y
> ># CONFIG_PCNET32 is not set
> ># CONFIG_APRICOT is not set
> ># CONFIG_CS89x0 is not set
> ># CONFIG_DE4X5 is not set
> >CONFIG_DEC_ELCP=y
> ># CONFIG_DGRS is not set
> ># CONFIG_EEXPRESS_PRO100 is not set
> ># CONFIG_NET_POCKET is not set
> ># CONFIG_FDDI is not set
> ># CONFIG_DLCI is not set
> ># CONFIG_PLIP is not set
> ># CONFIG_PPP is not set
> ># CONFIG_SLIP is not set
> ># CONFIG_NET_RADIO is not set
> ># CONFIG_TR is not set
> ># CONFIG_WAN_DRIVERS is not set
> ># CONFIG_LAPBETHER is not set
> ># CONFIG_X25_ASY is not set
> >
> >#
> ># Amateur Radio support
> >#
> ># CONFIG_HAMRADIO is not set
> >
> >#
> ># ISDN subsystem
> >#
> ># CONFIG_ISDN is not set
> >
> >#
> ># CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
> >#
> ># CONFIG_CD_NO_IDESCSI is not set
> >
> >#
> ># Filesystems
> >#
> ># CONFIG_QUOTA is not set
> ># CONFIG_MINIX_FS is not set
> >CONFIG_EXT2_FS=y
> >CONFIG_ISO9660_FS=y
> ># CONFIG_JOLIET is not set
> >CONFIG_FAT_FS=y
> >CONFIG_MSDOS_FS=y
> ># CONFIG_UMSDOS_FS is not set
> >CONFIG_VFAT_FS=y
> >CONFIG_PROC_FS=y
> >CONFIG_NFS_FS=y
> >CONFIG_NFSD=y
> >CONFIG_SUNRPC=y
> >CONFIG_LOCKD=y
> ># CONFIG_CODA_FS is not set
> >CONFIG_SMB_FS=y
> ># CONFIG_SMB_WIN95 is not set
> ># CONFIG_HPFS_FS is not set
> >CONFIG_NTFS_FS=y
> ># CONFIG_SYSV_FS is not set
> ># CONFIG_AFFS_FS is not set
> ># CONFIG_HFS_FS is not set
> ># CONFIG_ROMFS_FS is not set
> ># CONFIG_AUTOFS_FS is not set
> ># CONFIG_UFS_FS is not set
> ># CONFIG_MAC_PARTITION is not set
> >CONFIG_NLS=y
> >
> >#
> ># Native Language Support
> >#
> ># CONFIG_NLS_CODEPAGE_437 is not set
> ># CONFIG_NLS_CODEPAGE_737 is not set
> ># CONFIG_NLS_CODEPAGE_775 is not set
> ># CONFIG_NLS_CODEPAGE_850 is not set
> ># CONFIG_NLS_CODEPAGE_852 is not set
> ># CONFIG_NLS_CODEPAGE_855 is not set
> ># CONFIG_NLS_CODEPAGE_857 is not set
> ># CONFIG_NLS_CODEPAGE_860 is not set
> >CONFIG_NLS_CODEPAGE_861=y
> ># CONFIG_NLS_CODEPAGE_862 is not set
> ># CONFIG_NLS_CODEPAGE_863 is not set
> ># CONFIG_NLS_CODEPAGE_864 is not set
> ># CONFIG_NLS_CODEPAGE_865 is not set
> ># CONFIG_NLS_CODEPAGE_866 is not set
> ># CONFIG_NLS_CODEPAGE_869 is not set
> ># CONFIG_NLS_CODEPAGE_874 is not set
> ># CONFIG_NLS_ISO8859_1 is not set
> ># CONFIG_NLS_ISO8859_2 is not set
> ># CONFIG_NLS_ISO8859_3 is not set
> ># CONFIG_NLS_ISO8859_4 is not set
> ># CONFIG_NLS_ISO8859_5 is not set
> ># CONFIG_NLS_ISO8859_6 is not set
> ># CONFIG_NLS_ISO8859_7 is not set
> ># CONFIG_NLS_ISO8859_8 is not set
> ># CONFIG_NLS_ISO8859_9 is not set
> ># CONFIG_NLS_KOI8_R is not set
> >
> >#
> ># Character devices
> >#
> >CONFIG_VT=y
> >CONFIG_VT_CONSOLE=y
> >CONFIG_SERIAL=y
> ># CONFIG_SERIAL_CONSOLE is not set
> ># CONFIG_SERIAL_EXTENDED is not set
> ># CONFIG_SERIAL_NONSTANDARD is not set
> ># CONFIG_PRINTER is not set
> >CONFIG_MOUSE=y
> ># CONFIG_ATIXL_BUSMOUSE is not set
> ># CONFIG_BUSMOUSE is not set
> ># CONFIG_MS_BUSMOUSE is not set
> >CONFIG_PSMOUSE=y
> >CONFIG_82C710_MOUSE=y
> ># CONFIG_PC110_PAD is not set
> ># CONFIG_UMISC is not set
> ># CONFIG_QIC02_TAPE is not set
> >CONFIG_APM=y
> >CONFIG_APM_IGNORE_USER_SUSPEND=y
> >CONFIG_APM_DO_ENABLE=y
> >CONFIG_APM_CPU_IDLE=y
> >CONFIG_APM_DISPLAY_BLANK=y
> ># CONFIG_APM_POWER_OFF is not set
> >CONFIG_APM_IGNORE_MULTIPLE_SUSPEND=y
> >CONFIG_WATCHDOG=y
> ># CONFIG_WATCHDOG_NOWAYOUT is not set
> ># CONFIG_WDT is not set
> >CONFIG_SOFT_WATCHDOG=y
> ># CONFIG_PCWATCHDOG is not set
> ># CONFIG_ACQUIRE_WDT is not set
> ># CONFIG_RTC is not set
> ># CONFIG_VIDEO_DEV is not set
> ># CONFIG_NVRAM is not set
> ># CONFIG_JOYSTICK is not set
> ># CONFIG_MISC_RADIO is not set
> >
> >#
> ># Ftape, the floppy tape device driver
> >#
> ># CONFIG_FTAPE is not set
> >
> >#
> ># Sound
> >#
> ># CONFIG_SOUND is not set
> >
> >#
> ># Kernel hacking
> >#
> >CONFIG_PROFILE=y
> >CONFIG_PROFILE_SHIFT=2
> ># CONFIG_MAGIC_SYSRQ is not set
> >CONFIG_VGA_CONSOLE=
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu

Next message: Trevor Johnson: "2.1.93 won't compile"
Previous message: Paul Gortmaker: "Re: ramdisk and initrd in 2.1.9x"