> <3>ide-floppy: hdc: I/O error, pc = 5a, key = 5, asc = 24, ascq = 0
> <3>ide-floppy: Can't get drive capabilities
> <6>hdc: 98304kB, 32/64/96 CHS, 4096 kBps, 512 sector size, 2941 rpm
> <5>hdc: The drive reports both 100663296 and 0 bytes as its capacity
> [...]
I noticed one more possible problem.
The IDE ZIP seems to report incorrect geometry (CHS=32/64/96). Paralel port
ZIP reports CHS=96/64/32 and this agrees with pre-defined partition table
on a ZIP disquette.
Is it a hardware problem or kernel detection problem ?
Regards
-- ======================================================================= Andrzej M. Krzysztofowicz ankry@mif.pg.gda.pl phone: (48)(58) 347 14 61 fax: (48)(58) 347 28 21 Faculty of Applied Phys.& Maths, Technical University of Gdansk, Poland- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu