Re: SMTP 2.0.34pre5 problems

Christophe Dupre (cdupre@risq.qc.ca)
Fri, 03 Apr 1998 09:18:16 -0500

> > interrupts are enabled during those operations). However, I would imagine
> > that being in an interrupt, even if interrupts are enabled, might be the
> > cause of this message. So, very heavy disk load could cause this message
>
> If interrupts are enabled the IPI will execute regardless of locks or
> anything else.

Hi all,
yesterday late afternoon, when I came back from work (the server is at home),
I still had a screenfull of those IPI message. No other error message in the
log, no SCSI error (and the driver is set at verbose in lilo.conf)...

Is there anything I could do to track this down ? I will try to load the SCSI
subsystem see if I can recreate the problem, but I can't see anything that
would load up the disks...

-- 


Christophe Dupre
Analyste de systemes, 
RISQ inc.
1801 McGill College, suite 800           Tel: (514) 840-1235, ext 6971
Montreal, QC CANADA                      FAX: (514) 840-1244


"Nous ne sommes pas libres de ne pas etre libres, nous sommes obliges de 
l'etre"  -  Fernando Savater


#include <disclaimer.h>






-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu