[2.1.78] aha1542.c problem

Tony Gale (gale@daedalus.dra.hmg.gb)
Wed, 07 Jan 1998 11:11:27 -0000 (GMT)

I don't know who has been doing the changes to the aha1542 driver, but
they cause my CDROM player to not be detected properly,
with the card and device being reset.

Boot messages are:

Configuring Adaptec (SCSI-ID 7) at IO :334, IRQ 10, DMA priority 5
aha1542.c: Using extended bios translation
scsi0 : Adaptec 1542
scsi : 1 host.
Vendor: DEC Model: DSP3105S Rev: 386C
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 2, lun 0
Vendor: SEAGATE Model: ST31200N Rev: 8648
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 4, lun 0
Vendor: NEC Model: CD-ROM DRIVE:502 Rev: 2.3
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0
scsi : detected 1 SCSI cdrom 2 SCSI disks total.
aha1542.c: Trying device reset for target 5
HACC aha1542.c: interrupt received, but no mail.
Sent BUS RESET to scsi host 0
SCSI device sda: hdwr sector= 512 bytes. Sectors= 2050860 [1001 MB]
SCSI device sda: hdwr sector= 512 bytes. Sectors= 2061108 [1006 MB]

Thanks

Tony

--
E-Mail: Tony Gale <gale@minotaur.dra.hmg.gb>
So many men, so many opinions; every one his own way.
                -- Publius Terentius Afer (Terence)


The views expressed above are entirely those of the writer
and do not represent the views, policy or understanding of
any other person or official body.