How to overcome 'Too little memory for virtual resolution 1600 1200'...

Rajesh kumar (rajesh@isac.ernet.in)
Wed, 30 Jul 1997 12:52:15 +0000 (CUT)

Hi all,
I am very new in Linux. I loaded linux version 2.0.0. on a PC-586
with 8MB RAM and 1.2GB disk space.

All the configuration is working fine, except XFree86 X-window.
When I start 'xinit' or 'startx', errors come like below.

Since I am very new so not able to find out the problems as well
as solution.

As per the available manuals I dumped the 'X -probeonly' file
which is included below.

Can Anybody help me out for successful running of 'xinit' or
'startx'
Thanks a lot in advance.

The output of X -probeonly :
----------------------------

XFree86 Version 3.1.2 / X Window System
(protocol Version 11, revision 0, vendor release 6000)
Operating System: Linux
Configured drivers:
SVGA: server for 8-bit colour SVGA (Patchlevel 0):
et4000, et4000w32, et4000w32i, et4000w32p, et3000, pvga1, wd90c00,
wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, vgawonder,
tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga9000, clgd5420,
clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434,
clgd5436, clgd6205, clgd6215, clgd6225, clgd6235, ncr77c22, ncr77c22e,
cpq_avga, oti067, oti077, oti087, mx, al2101, ali2228, ali2301,
ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7,
ct65520, ct65530, ct65540, ct65545, ark1000vl, ark1000pv, ark2000pv,
realtek, generic
(using VT number 7)

XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200,
3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "Cirrus Logic GD543x"
(**) SVGA: Monitor ID: "My Monitor"
(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) SVGA: chipset: generic
(--) SVGA: videoram: 64k
(**) SVGA: clocks: 25.18
SVGA: Too little memory for virtual resolution 1600 1200

*** A configured device found, but display modes could not be resolved.***


--------------------------------------------------------------------------
Good Luck!
Rajesh

email:rajesh@isac.ernet.in

--------------------------------------------------------------------------