> Greetings,
>
> I have been poking around in the manpages for mt(1) and st(4), and
> linux/drivers/scsi/README.st, and I don't see any ioctl for switching
> tapes in an autoloader. I recently purchased a Seagate 4586NP SCSI-2 DAT
> autoloader recognized as:
>
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: ARCHIVE Model: Python 28849-XXX Rev: 5.AC
> Type: Sequential-Access ANSI SCSI revision: 02
available from ftp://dandelion.com
MTX - SCSI Tape Attached Medium Changer Control Program
Version 1.0 Beta for Linux
BETA RELEASE
7 March 1997
Leonard N. Zubkoff
Dandelion Digital
lnz@dandelion.com
Copyright 1997 by Leonard N. Zubkoff <lnz@dandelion.com>
INTRODUCTION
The MTX program controls the robotic mechanism in DDS Autoloaders such as
the Seagate 4586NP (Archive Python 28849-XXX). ...
------------------------------------------------------------------
Jon Lewis <jlewis@fdt.net> | Unsolicited commercial e-mail will
Network Administrator | be proof-read for $199/message.
Florida Digital Turnpike |
________Finger jlewis@inorganic5.fdt.net for PGP public key_______