dmesg:
------------------------------------------------
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
Calibrating delay loop.. ok - 66.15 BogoMIPS
Memory: 30824k/33024k available (880k kernel code, 384k reserved, 936k data)
This processor honours the WP bit even when in supervisor mode. Good.
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.12 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP, IPIP
Linux IP multicast router 0.05.
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Linux version 2.0.1 (root@rubens) (gcc version 2.7.0) #3 Fri Apr 18 12:03:45 PDT 1997
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16450
tty01 at 0x02f8 (irq = 3) is a 16450
tty03 at 0x02e8 (irq = 3) is a 16550A
lp0 at 0x03bc, (polling)
Sound initialization started
Sound initialization complete
ftape-2.08 960314 for Linux 1.3.70
loop: registered device at major 7
hda: Conner Peripherals 1620MB - CFS1621A, 1548MB w/0kB Cache, LBA, CHS=786/64/63
hdb: Conner Peripherals 850MB - CFS850A, 812MB w/64kB Cache, LBA, CHS=825/32/63
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 1.44M
Started kswapd v 1.4.2.2
FDC 0 is an 8272A
aztcd: AZTECH, ORCHID, OKANO, WEARNES, TXC, CyDROM CD-ROM Driver
aztcd: (C) 1994-96 W.Zimmermann
aztcd: DriverVersion=2.50 BaseAddress=0x320 For IDE/ATAPI-drives use ide-cd.c
aztcd: If you have problems, read /usr/src/linux/Documentation/cdrom/aztcd
aztcd: no AZTECH CD-ROM drive found-Try boot parameter aztcd=<BaseAddress>,0x79
tunnel: version v0.2b2
PPP: version 2.2.0 (dynamic channel allocation)
TCP compression code copyright 1989 Regents of the University of California
PPP Dynamic channel allocation code copyright 1995 Caldera, Inc.
PPP line discipline registered.
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
wd.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)
eth0: WD80x3 at 0x240, 00 00 C0 3B 46 D7 WD8013, IRQ 10, shared memory at 0xd0000-0x
d3fff.
Partition check:
hda: hda1 hda2 hda3 hda4
hdb: hdb1 hdb2 hdb3 hdb4
JAVA Binary support v1.01 for Linux 1.3.98 (C)1996 Brian A. Lantz
VFS: Mounted root (ext2 filesystem) readonly.
Unable to identify CD-ROM format.
Unable to identify CD-ROM format.
fcntl_setlk() called by process 80 (lpd) with broken flock() emulation
--------------------------------------------------
pppd
--------------------------------------------
Sorry - PPP is not available on this system
SIOCADDRT: No such device
--------------------------------------------------
the ppp dial up works find under 1.2.13 kernel . Does any body know how to diagnose
this problem and fix it ?
I checked the How-To, couldn't find it.
I want to upgrade to 2.0 because I want to enable multicasting and tunnelling
and firewall. I just got the new release of kernel from mit site,
checked the option I like and put the kernel compiled there,
reboot, and oops, the ppp doesn't work any longer.
Hope I can get some help.
Jinsong
jinsong@wag.caltech.edu