Ethernet works fine, I'm not sure I under what Link encap: UNSPEC
means on tr0...
How do I read tr0 on tcpdump?
oadin device 'eth0'...
eth0: 3Com 3c589, port 0x300, irq 3, 10baseT port, 00 60 97 48 25 83
Adding Swap: 23148k swap-space
ibmtr_cs.c 1.10 1996/01/06 05:19:00 (Steve Kipisz)
ibmtr_attach()
ibmtr_event()
ibmtr_config(0x0102cde0)
tr0: port 0xa20, irq 5, mmio 0xd2000, sram 0xd4000,
hwaddr=0020AF226343
tr0: Initial interrupt : shared RAM located at 000D42D4.
tr0: Adapter initialized and opened.
loading device 'eth0'...
eth0: 3Com 3c589, port 0x300, irq 3, 10baseT port, 00 60 97 48 25 83
: leisner@toshiba;ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0
UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1
RX packets:14 errors:0 dropped:0 overruns:0
TX packets:14 errors:0 dropped:0 overruns:0
tr0 Link encap:UNSPEC HWaddr 00-20-AF-22-63-43-00-EC-00-00-00-00-00-00-00-00
inet addr:13.231.132.161 Bcast:13.231.135.255 Mask:255.255.252.0
UP BROADCAST RUNNING MTU:2000 Metric:1
RX packets:8347 errors:0 dropped:0 overruns:0
TX packets:282 errors:0 dropped:0 overruns:0
Interrupt:5 Base address:0xa20
eth0 Link encap:10Mbps Ethernet HWaddr 00:60:97:48:25:83
inet addr:13.231.132.161 Bcast:13.231.135.255 Mask:255.255.252.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:48785 errors:0 dropped:0 overruns:0
TX packets:396 errors:0 dropped:0 overruns:0
Interrupt:3 Base address:0x300
leisner@toshiba;tcpdump -i tr0 not ip
tcpdump: snoop: unknown physical layer type
marty leisner@sdsp.mc.xerox.com
Don't confuse education with schooling.
Milton Friedman to Yogi Berra