: After doing some head banging I realize the problem: the NE2000 driver
: is dumb-as-a-post when it comes to autoprobing :-(
ne.c has its well-sorted list of addresses to probe at, and if you use
it as a "non-module", it will find the PCI cards, too.
: The RealTek RTK8029 cards are _PCI_ so they must be probed, and hence
: the current driver cannot be used as a module. This should be documented.
This is wrong; due to a decision of the author, ne.c will not auto-probe
for cards if used as a module. But you can always say something like
insmod ne.c io=0x6000
and the module will find your PCI card.
Cheers -e
--
Eberhard Moenkeberg GGG W W DDDD GGG
G W W D D G
E-Mail: emoenke@gwdg.de G GGG W W D D G GGG
Phone: +49 551 2011551 Fax: +49 551 21119 G G W W W D D G G
SnailMail: GGG WW WW DDDD GGG
Gesellschaft fuer wissenschaftliche Datenverarbeitung mbH
Am Fassberg, D-37077 Goettingen, GERMANY
At home: Modem ("guest") ++49-551-7704102, ISDN-HDLC 7704103